Skip to content

iPhone 18 Pro Max Cases

Every case on this page is printed after you order it and cut for the iPhone 18 Pro Max alone, in builds that run from a light Slim shell to a two-layer case with a raised camera surround.

Showing 24 of 1620

Load more

Pairs with any device

Match it with a desk mat, mouse pad, tumbler or laptop sleeve in the same print.

Compare case types for iPhone 18 Pro Max

Case typeToughMagSafe compatibleMagSafe + camera guardCard holderSlimClear
PriceCA$49.00CA$54.00CA$54.00CA$49.00CA$39.00CA$39.00
ConstructionTwo-layer case with raised edgesMagnet ring for MagSafe accessoriesTwo-layer MagSafe case with a raised camera surroundSlim case with a slot for one cardLightweight hard shellSee-through case: the design floats on the phone
Available for iPhone 18 Pro MaxYesYesYesYesYesYes

Materials and protection details come from verified product data on each product page.

Made for the iPhone 18 Pro Max

Apple introduced the iPhone 18 Pro Max in September 2026. It has a 6.9-inch display. On the back: Pro Fusion camera system — 48MP Fusion Main, 48MP Fusion Ultra Wide, 48MP Fusion Telephoto.

A case for the iPhone 18 Pro Max is cut for its body, 163.4 × 78 × 8.75 mm, and for its camera layout, so a case made for another model will not line up. To check your model, open Settings › General › About on the phone and tap the part number next to Model Number: it changes to the model number, which starts with A. The model numbers of the iPhone 18 Pro Max are A3473, A3716, A3718, and A3717.

The iPhone 18 Pro Max supports MagSafe.

Related models, each with its own case

Introduced
September 2026
Display
6.9-inch
Rear cameras
Pro Fusion camera system: 48MP Fusion Main, 48MP Fusion Ultra Wide, 48MP Fusion Telephoto
Size
163.4 × 78 × 8.75 mm
Charging
MagSafe and Qi2
Port
USB-C
MagSafe
Yes
Model numbers
A3473, A3716, A3718, A3717

Sources: support.apple.com, Apple Newsroom

About iPhone 18 Pro Max Cases

Tough, Slim, Clear or an iPhone 18 Pro Max MagSafe case

The iPhone 18 Pro Max arrived in 2026, and here is how the builds for an iPhone 18 Pro Max case compare. Tough pairs a polycarbonate outer shell with a TPU liner and raised edges. MagSafe compatible is an iPhone 18 Pro Max MagSafe case that keeps that two-layer idea and adds a magnetic module for chargers and accessories. MagSafe + camera guard goes further, with the lens area built into a shock-absorbing frame and reinforced, air-cushioned corners. Slim is a one-piece polycarbonate shell, Card holder carries one card on the back, and Clear lets the design float over the phone.

A case for iPhone 18 Pro Max only, not the Pro

The iPhone 18 Pro and the iPhone 18 Pro Max share a generation but not a case. Each case for iPhone 18 Pro Max here is produced for the Pro Max only, so the camera cutout, buttons and ports line up with that phone and no other. If you are unsure which one you own, open Settings › General › About and read the model name. Choosing it correctly matters, because a case printed for the wrong model cannot be sent back, and we would much rather you never run into that.

Picking a print for your 18 Pro Max case

Our prints are created by YOONIG and grouped into collections, so it helps to start with a mood. Solid color and minimal designs keep things quiet. Floral and botanical bring in plants, while checkered and geometric lean graphic. Fruit, pink and Paris prints are there too. On Slim, Tough, MagSafe compatible and MagSafe + camera guard the artwork wraps around the edges, and you choose a glossy or matte finish on the product page before your iPhone 18 Pro Max case is made.

Not sure which model you have? The device guide shows where to find it.

iPhone 18 Pro Max Cases: questions & answers

Fit, builds, production and delivery — what people ask before they order.

Can I use MagSafe chargers with an iPhone 18 Pro Max case?

Yes, if you choose MagSafe compatible, MagSafe + camera guard or Card holder. MagSafe compatible has a built-in magnetic module for MagSafe accessories and charging, and the camera guard build hides its magnets in the frame so the printed back stays flat. Tough, Slim and Clear support wireless charging without magnets.

Which build gives the camera extra protection?

MagSafe + camera guard. Its camera area is built into the shock-absorbing TPU frame to guard the lenses, and the corners are air-cushioned with reinforced bumpers. Tough is the other two-layer choice, without magnets, combining raised edges, a TPU liner and a polycarbonate outer shell.

Is the design printed on the sides too?

On most builds, yes. Tough, Slim, MagSafe compatible and MagSafe + camera guard use a 3D wrap, so the print continues around the edges, and Card holder is printed all over the exterior. On Tough and Slim the print is also UV-protected. Clear works differently: the design floats over the phone on a see-through back.

Can I return a case if I picked the iPhone 18 Pro instead?

We are sorry, but no. Each case is made to order for the model you select, so one printed for the 18 Pro cannot be returned or swapped for a Pro Max version. A quick look at Settings › General › About before checkout avoids the mix-up.

When will my case ship?

Because it is printed only after you order, production and shipping times are shown at checkout before you pay. That way you see the timing for your address and the exact item you chose before committing, which is handy when the case is a gift.

Glossy or matte: what is the difference in practice?

Both finishes carry the same artwork; the choice only changes the surface. Glossy has a shiny look, matte a softer, low-shine one. Every build on this page except Clear lists both options, and you set the finish on the product page before adding the case to your bag.

iPhone 18 Pro Max guides

Shop by style

Ask an AI about us

See what AI says about YOONIG

Opens the assistant with a question about this page already typed.