Periwinkle iPhone 13 mini Case
The Periwinkle iPhone 13 mini case is a solid color phone case made for the iPhone 13 mini, with the camera, button and port openings placed for that model. Choose Tough, Card holder or Slim. Each one comes in a glossy or matte finish and is printed only when you order it.
Device
Finish: Glossy
Case type: Tough
- Raised camera & screen edges
- Two-layer protection
- Wireless charging
- Made to orderPrinted after you order, usually within 2–7 business days, then 8–18 business days for standard delivery to Qatar. Checkout shows the dates for your address before you pay.
- Shipping, shown separatelyCarrier options and delivery estimate appear once you enter your address.
- ReturnsRead the returns policy before you order.
Description
Periwinkle: one plain, even color with no pattern.
Builds offered for the iPhone 13 mini
- Tough — a printed hard back over a shock-absorbing inner layer, with raised edges around the screen and camera. Supports wireless charging.
- Card holder — an impact-resistant polycarbonate case with a slot for one card. MagSafe compatible.
- Slim — a one-piece polycarbonate snap case, slim and lightweight. Supports wireless charging.
- Glossy or matte print finish
- Printed to order for the iPhone 13 mini
Compatibility
Made for iPhone 13 mini. Cutouts and dimensions are specific to this model.
Materials & finish
Tough
- Outer shell: 100% polycarbonate, resists daily impacts
- Inner liner: 100% TPU that absorbs shock from impacts
- Dual-layer construction
- Design printed round the edges (3D wrap), UV-protected against outdoor weathering
- Wireless charging compatible (not MagSafe)
- Glossy or matte finish
- Clear, open ports
Print quality
Prints are produced from the original artwork file at full resolution. Colors on screen can vary slightly from the printed result.
Returns
Damaged, defective or misprinted? Contact us within 30 days of delivery for a free replacement or a full refund. Every phone case is printed for your order, so we can’t take it back for a change of mind or a wrong model once it’s printed.
Care
Clean with a soft, damp cotton or microfiber cloth. Avoid using chemicals.
Periwinkle iPhone 13 mini Case
QAR 129.00
Periwinkle
Light, soft blue with a clear violet lean, like the small spring flower it is named after. It is airy and gentle, and sits between blue and lavender. Daylight keeps it fresh. Indoors it grows a little dustier. It pairs with white, gray, navy and silver. It also looks lovely beside pale yellow, pink or mint. It feels sweet and calm.
Periwinkle (Light Purple) Phone Case, Solid Color, No Print
Periwinkle is a soft blue-violet, light and airy. Each piece is one even color, with no print or pattern. Many shoppers search for a light purple phone case.
A periwinkle phone case fits iPhone, Samsung Galaxy and Google Pixel. It pairs well with white, gray and pale yellow. Find it as a periwinkle airpods case or periwinkle apple watch band. The periwinkle tumbler and periwinkle desk mat match too.
Shop the Periwinkle design
Made for the iPhone 13 mini
A case for the iPhone 13 mini is cut for its body, 131.5 × 64.2 × 7.65 mm, and for its camera layout, so a case made for another model will not line up. To check your model, open Settings › General › About on the phone and tap the part number next to Model Number: it changes to the model number, which starts with A.
The iPhone 13 mini supports MagSafe. Card holder is MagSafe compatible. Tough and Slim have no magnet ring.
Related models, each with its own case
- iPhone 13 Pro Max cases · 6.7-inch, Triple 12MP cameras
- iPhone 13 Pro cases · 6.1-inch, Triple 12MP cameras
- iPhone 13 cases · 6.1-inch, Dual 12MP cameras
- Introduced
- September 2021
- Display
- 5.4-inch
- Rear cameras
- Dual 12MP cameras (Main, Ultra Wide)
- Size
- 131.5 × 64.2 × 7.65 mm
- Charging
- MagSafe and Qi
- Port
- Lightning
- MagSafe
- Yes
- Model numbers
- A2481, A2626, A2629, A2630, A2628
Sources: support.apple.com, Apple Newsroom
Complete the set
Periwinkle on other products. Only items compatible with your selection are shown.
- Periwinkle AirPods CaseFromQAR 104.00AirPods case · choose your model
- Periwinkle MagSafe WalletQAR 129.00MagSafe wallet
- Periwinkle AirTag CaseFromQAR 89.00AirTag case · choose your model
- Periwinkle Apple Watch BandFromQAR 144.00Apple Watch band · choose your size
Reviews
No reviews yet for our phone cases.
Only customers with a verified order can leave a review.
Questions & answers
Answers come from the YOONIG team. Questions are checked before they appear.
Will the Periwinkle case fit my iPhone 13 mini?
Yes. This case is made for the iPhone 13 mini only, cut for its body and camera layout. It fits model numbers A2481, A2626, A2629, A2630, A2628. Cases for other models, even close ones like the iPhone 13, iPhone 13 Pro or iPhone 13 Pro Max, won’t line up.
Which Periwinkle case type should I choose for the iPhone 13 mini?
For the iPhone 13 mini you can pick 3 builds. Tough: two-layer case with raised edges. Card holder: slim case with a slot for one card. Slim: lightweight hard shell. Each one carries the same Periwinkle color.
Is the Periwinkle color available on other products?
Yes. The same Periwinkle color is also made as an AirTag case, a MagSafe wallet, a laptop sleeve, an AirPods case, a desk mat, a mouse pad, a tumbler, an Apple Watch band, a MacBook case, a Kindle case and an iPad case. They are under “Also in Periwinkle” on this page.
Is Periwinkle a solid color with no pattern?
Yes. Periwinkle is one even color, with no print, pattern or graphic on it.
What color is Periwinkle?
Periwinkle is a soft blue-violet, light and airy. If you search for a light purple case, this is the shade to look at.
You may also like
Ask an AI about us
See what AI says about YOONIG
- ChatGPT (opens in a new tab)
- Claude (opens in a new tab)
- Google AI (opens in a new tab)
- Grok (opens in a new tab)
Opens the assistant with a question about this page already typed.







