Skip to content

iPhone 17 Pro Max Cases

One phone, many options: the iPhone 17 Pro Max cases here range from a clear magnetic case to a two-layer guard for the camera, and each is printed after you order.

Showing 24 of 1620

Load more

Pairs with any device

Match it with a desk mat, mouse pad, tumbler or laptop sleeve in the same print.

Compare case types for iPhone 17 Pro Max

Case typeToughMagSafe compatibleMagSafe + camera guardCard holderSlimClearClear MagSafe
PriceKWD 11.000KWD 11.500KWD 12.000KWD 11.000KWD 9.000KWD 9.000KWD 11.000
ConstructionTwo-layer case with raised edgesMagnet ring for MagSafe accessoriesTwo-layer MagSafe case with a raised camera surroundSlim case with a slot for one cardLightweight hard shellSee-through case: the design floats on the phoneSee-through case with built-in magnets
Available for iPhone 17 Pro MaxYesYesYesYesYesYesYes

Materials and protection details come from verified product data on each product page.

Made for the iPhone 17 Pro Max

Apple introduced the iPhone 17 Pro Max in September 2025. It has a 6.9-inch display. On the back: Pro Fusion camera system — 48MP Fusion Main, 48MP Fusion Ultra Wide, 48MP Fusion Telephoto.

A case for the iPhone 17 Pro Max is cut for its body, 163.4 × 78 × 8.75 mm, and for its camera layout, so a case made for another model will not line up. To check your model, open Settings › General › About on the phone and tap the part number next to Model Number: it changes to the model number, which starts with A. The model numbers of the iPhone 17 Pro Max are A3257, A3525, A3527, and A3526.

The iPhone 17 Pro Max supports MagSafe.

Related models, each with its own case

Introduced
September 2025
Display
6.9-inch
Rear cameras
Pro Fusion camera system: 48MP Fusion Main, 48MP Fusion Ultra Wide, 48MP Fusion Telephoto
Size
163.4 × 78 × 8.75 mm
Charging
MagSafe and Qi2
Port
USB-C
MagSafe
Yes
Model numbers
A3257, A3525, A3527, A3526

Sources: support.apple.com, Apple Newsroom

About iPhone 17 Pro Max Cases

Picking an iPhone 17 Pro Max case by priority

Your iPhone 17 Pro Max case, for the 2025 phone, can be ordered in these builds: Tough, Slim, Card holder, Clear, Clear MagSafe, MagSafe compatible and MagSafe + camera guard. That covers most priorities. If you want the print visible over a see-through back and magnets too, Clear MagSafe combines both. If the camera worries you, the camera guard build has the lens area built into its TPU frame. If you only want something thin, Slim keeps to a single polycarbonate shell.

A 17 Pro Max case won't suit the 17 Pro

The iPhone 17 Pro and iPhone 17 Pro Max are sold side by side, yet each needs its own case. Ours follow that rule: a 17 Pro Max case from us is made for the 17 Pro Max only, and it will not suit the 17 Pro, the iPhone 17 or the iPhone Air. You can confirm your model under Settings › General › About. As every case is printed for the model chosen at checkout, we are unable to take back one ordered for the wrong phone.

Clear, card or camera guard: iPhone 17 Pro Max MagSafe cases

An iPhone 17 Pro Max MagSafe case comes in different forms. MagSafe compatible hides a magnetic module inside a two-layer printed case. MagSafe + camera guard puts the magnets in the frame so the printed back stays flat. Clear MagSafe has built-in magnets behind a clear back with cushioned TPU edges. Card holder is MagSafe compatible too, with one card slot. Tough, Slim and Clear skip the magnets but support wireless charging, so every iPhone 17 Pro Max case here works with a charger of some kind.

Not sure which model you have? The device guide shows where to find it.

iPhone 17 Pro Max Cases: questions & answers

Fit, builds, production and delivery — what people ask before they order.

Which iPhone 17 Pro Max case lets the phone itself show?

The see-through builds. Clear has a crystal-clear back with cushioned TPU sides, and Clear MagSafe adds built-in magnets behind a clear back. In both, the printed design sits over the phone rather than covering it completely, so the phone becomes part of the look.

What does 3D wrap mean?

It means the print carries around the edges of the case instead of stopping at the back panel. On this model, Tough, Slim, MagSafe compatible and MagSafe + camera guard are printed this way, and Card holder is printed all over the exterior.

What makes the MagSafe + camera guard build different?

Its frame is shock-absorbing TPU with an impact-resistant polycarbonate back, and the camera area is built into that frame to guard the lenses. The corners are air-cushioned with reinforced bumpers, and the MagSafe magnets sit in the frame so the printed back stays completely flat.

Where are the blank cases made?

The specs for MagSafe compatible, MagSafe + camera guard, Slim and Card holder list the blank case as made in South Korea. Your chosen design is printed on it after you order, for the iPhone 17 Pro Max specifically.

I ordered for the wrong model. What now?

If the case was made for the 17 Pro or another phone, we cannot accept it back, because each order is printed for the model you selected. We know that is disappointing. For a new order, check Settings › General › About first, then choose iPhone 17 Pro Max on the product page.

Can I see the timing before paying?

Yes. Production and shipping times are shown at checkout before you pay. Each case is printed after the order is placed, so that estimate covers making your case as well as getting it to your door.

iPhone 17 Pro Max guides

Shop by style

Ask an AI about us

See what AI says about YOONIG

Opens the assistant with a question about this page already typed.