Skip to content

iPhone 18 Pro Cases

Made for the iPhone 18 Pro and nothing else, these cases are printed once your order comes in. Pick a build first, then a print from collections like retro, Paris or botanical.

Showing 24 of 1620

Load more

Pairs with any device

Match it with a desk mat, mouse pad, tumbler or laptop sleeve in the same print.

Compare case types for iPhone 18 Pro

Case typeToughMagSafe compatibleMagSafe + camera guardCard holderSlimClear
PriceKWD 11.000KWD 11.500KWD 12.000KWD 11.000KWD 9.000KWD 9.000
ConstructionTwo-layer case with raised edgesMagnet ring for MagSafe accessoriesTwo-layer MagSafe case with a raised camera surroundSlim case with a slot for one cardLightweight hard shellSee-through case: the design floats on the phone
Available for iPhone 18 ProYesYesYesYesYesYes

Materials and protection details come from verified product data on each product page.

Made for the iPhone 18 Pro

Apple introduced the iPhone 18 Pro in September 2026. It has a 6.3-inch display. On the back: Pro Fusion camera system — 48MP Fusion Main, 48MP Fusion Ultra Wide, 48MP Fusion Telephoto.

A case for the iPhone 18 Pro is cut for its body, 150 × 71.9 × 8.75 mm, and for its camera layout, so a case made for another model will not line up. To check your model, open Settings › General › About on the phone and tap the part number next to Model Number: it changes to the model number, which starts with A. The model numbers of the iPhone 18 Pro are A3472, A3713, A3715, and A3714.

The iPhone 18 Pro supports MagSafe.

Related models, each with its own case

Introduced
September 2026
Display
6.3-inch
Rear cameras
Pro Fusion camera system: 48MP Fusion Main, 48MP Fusion Ultra Wide, 48MP Fusion Telephoto
Size
150 × 71.9 × 8.75 mm
Charging
MagSafe and Qi2
Port
USB-C
MagSafe
Yes
Model numbers
A3472, A3713, A3715, A3714

Sources: support.apple.com, Apple Newsroom

About iPhone 18 Pro Cases

18 Pro case or Pro Max case? Check first

Apple released the iPhone 18 Pro alongside the iPhone 18 Pro Max in 2026, and they need different cases. Each iPhone 18 Pro case here is cut for the 18 Pro only, with the camera opening and button positions matched to it. To double-check before you order, go to Settings › General › About, where the model name is listed. That small step is worth it: we print each case for the model you choose, so a mismatch cannot be returned.

With or without magnets: iPhone 18 Pro MagSafe cases

Some builds carry magnets and some do not; the magnetic ones are your iPhone 18 Pro MagSafe cases. MagSafe compatible has a magnetic module for MagSafe accessories and charging inside a two-layer polycarbonate and TPU body. MagSafe + camera guard places its magnets in the frame, keeping the printed back flat, and adds a raised camera surround. Card holder is also MagSafe compatible, with a slot for one card. Without magnets, you have Tough, Slim and Clear, each listed for wireless charging.

Glossy, matte or clear: finishing iPhone 18 Pro cases

Every print starts as an original drawing by our team. On Tough, Slim, MagSafe compatible and MagSafe + camera guard it is applied as a 3D wrap, carried around the edges rather than stopping at the back, and Tough and Slim list UV protection for the colors. You choose glossy or matte on each of those builds. The Clear build takes another approach: the back is crystal-clear and the design sits over the phone, framed by cushioned TPU sides. Whichever you pick, your iPhone 18 Pro case is produced after you order.

Not sure which model you have? The device guide shows where to find it.

iPhone 18 Pro Cases: questions & answers

Fit, builds, production and delivery — what people ask before they order.

Will an iPhone 18 Pro Max case fit my iPhone 18 Pro?

No. The 18 Pro and 18 Pro Max get separate listings because their cases are not interchangeable. Everything on this page is made for the 18 Pro specifically. If you have the Pro Max, head to the iPhone 18 Pro Max page instead, and check Settings › General › About if you are not sure.

Which build keeps the iPhone 18 Pro feeling light?

Slim. It is a lightweight one-piece polycarbonate shell that guards against scratches, with wireless charging support and the print wrapped around the edges. If you want something just as slim that also holds a card, Card holder is described as slim and lightweight and adds MagSafe compatibility.

Does the Card holder take more than one card?

It is designed for one. The slot sits on the back of a slim polycarbonate case, and the case is MagSafe compatible as well. If you usually carry several cards, the MagSafe compatible build, made for MagSafe accessories, may suit the way you work better.

Is there a print style for something low-key?

Yes. The solid color and minimal collections suit anyone who wants a quiet case, while checkered and geometric designs add pattern in a clean, graphic way. Each one is printed to order for the iPhone 18 Pro in the build you select on the product page.

How do I know when my order will arrive?

Production and shipping times are shown at checkout before you pay, so you see the timing for your order before confirming it. Since each case is printed only after purchase, that window includes making it as well as delivering it to you.

Can I get a matching AirPods case?

Possibly. YOONIG also prints AirPods cases and MacBook shells, and many collections appear across devices. Open the design you like and check the AirPods or MacBook pages to see whether that print is offered there too.

iPhone 18 Pro guides

Shop by style

Ask an AI about us

See what AI says about YOONIG

Opens the assistant with a question about this page already typed.