Skip to content

iPhone 13 Cases

Cases for the standard iPhone 13, printed to order with designs created by YOONIG, in builds including Card holder, Clear and Clear MagSafe.

Showing 24 of 1620

Load more

Pairs with any device

Match it with a desk mat, mouse pad, tumbler or laptop sleeve in the same print.

Compare case types for iPhone 13

Case typeToughMagSafe compatibleCard holderSlimClearClear MagSafe
PriceAED 129.00AED 134.00AED 129.00AED 109.00AED 109.00AED 129.00
ConstructionTwo-layer case with raised edgesMagnet ring for MagSafe accessoriesSlim case with a slot for one cardLightweight hard shellSee-through case: the design floats on the phoneSee-through case with built-in magnets
Available for iPhone 13YesYesYesYesYesYes

Materials and protection details come from verified product data on each product page.

Made for the iPhone 13

Apple introduced the iPhone 13 in September 2021. It has a 6.1-inch display. On the back: Dual 12MP cameras (Main, Ultra Wide).

A case for the iPhone 13 is cut for its body, 146.7 × 71.5 × 7.65 mm, and for its camera layout, so a case made for another model will not line up. To check your model, open Settings › General › About on the phone and tap the part number next to Model Number: it changes to the model number, which starts with A. The model numbers of the iPhone 13 are A2482, A2631, A2634, A2635, and A2633.

The iPhone 13 supports MagSafe.

Related models, each with its own case

Introduced
September 2021
Display
6.1-inch
Rear cameras
Dual 12MP cameras (Main, Ultra Wide)
Size
146.7 × 71.5 × 7.65 mm
Charging
MagSafe, Qi2 and Qi
Port
Lightning
MagSafe
Yes
Model numbers
A2482, A2631, A2634, A2635, A2633

Sources: support.apple.com, Apple Newsroom

About iPhone 13 Cases

Card holder, the iPhone 13 wallet case

If you would rather leave the wallet at home, Card holder is the iPhone 13 wallet case worth considering. It is a slim, lightweight case in impact-resistant polycarbonate with a slot on the back for one card. It is MagSafe compatible, printed all over its exterior as a 3D wrap and available in glossy or matte, with clear, open ports. Its blank is made in South Korea, and the print is added to your iPhone 13 case after you order.

Phone cases for iPhone 13 itself, not the mini or Pros

The iPhone 13 shares a 2021 launch and a name with the 13 mini, 13 Pro and 13 Pro Max, yet each takes a different case. Phone cases for iPhone 13 are made one model at a time, and this page is for the iPhone 13 itself. Settings › General › About lists the exact model. As every case is printed for the order, we cannot accept a return when the wrong model was chosen, so please take a moment to confirm.

Seeing the phone through an iPhone 13 clear case

Clear and Clear MagSafe are the iPhone 13 clear case builds. Both have a clear back with cushioned TPU around the sides, and your design is printed so it floats above the phone. Clear supports wireless charging; Clear MagSafe adds built-in magnets for MagSafe accessories. If you prefer the print to cover everything, Tough, Slim, MagSafe compatible and Card holder carry it around the edges of your iPhone 13 case.

Not sure which model you have? The device guide shows where to find it.

iPhone 13 Cases: questions & answers

Fit, builds, production and delivery — what people ask before they order.

Does the iPhone 13 mini use the same case?

No. The 13 mini has its own page and its own builds. Cases here are produced for the standard iPhone 13 only. Look under Settings › General › About to confirm, then choose the matching model on the product page.

What is the difference between MagSafe compatible and Tough?

Both are two-layer cases, polycarbonate outside and TPU inside, with a 3D wrap print in glossy or matte. MagSafe compatible has a built-in magnetic module for accessories and charging. Tough has raised edges, a UV-protected print and wireless charging, but no magnets.

Will my iPhone 13 case work with a wireless charger?

Tough, Slim and Clear are all listed as wireless charging compatible. MagSafe compatible supports MagSafe charging through its magnetic module, and Clear MagSafe and Card holder carry magnets for MagSafe accessories.

Is the print UV-protected?

On Tough and Slim it is listed that way: Tough's 3D wrap print is UV-protected against outdoor weathering, and Slim has UV-protected color. The other builds do not mention it in their specs, so choose Tough or Slim if sunlight is a concern.

Does the iPhone 13 get every print collection?

Yes, the whole print library is available for it, so you can browse pink, tropical, geometric or art designs, among others. The product page shows which builds each design comes in.

Where do I see production time?

At checkout. Production and shipping times are shown there before you pay. Because your iPhone 13 case is printed only after you order, that figure includes the time to make it.

Will an iPhone 14 case fit the iPhone 13?

We do not sell them as interchangeable. Every case we make is cut for one model, and the iPhone 14 and the iPhone 13 have separate pages. Order the case named in Settings › General › About, because a made-to-order case for another model cannot be returned.

What cases fit the iPhone 13?

The cases on this page, each made for the iPhone 13: Tough, Slim, Card holder, MagSafe compatible, Clear and Clear MagSafe. Pick a design and a build, and the case is printed for the iPhone 13 after you order.

Do you have cute iPhone 13 cases?

Yes. Our Cute collection gathers the playful prints, such as Kawaii Desserts, Meow Pastel Cats and Pink Bow Pattern, and each of them is made for the iPhone 13. Open a design, pick your case type and finish, and it is printed to order.

iPhone 13 guides

Shop by style

Ask an AI about us

See what AI says about YOONIG

Opens the assistant with a question about this page already typed.