Skip to content

iPhone 14 Plus Cases

Cases for the iPhone 14 Plus, printed once you order and cut for this model only, in builds from a light Slim shell to a dual-layer MagSafe case.

Showing 24 of 1620

Load more

Pairs with any device

Match it with a desk mat, mouse pad, tumbler or laptop sleeve in the same print.

Compare case types for iPhone 14 Plus

Case typeToughMagSafe compatibleCard holderSlimClearClear MagSafe
PriceAED 129.00AED 134.00AED 129.00AED 109.00AED 109.00AED 129.00
ConstructionTwo-layer case with raised edgesMagnet ring for MagSafe accessoriesSlim case with a slot for one cardLightweight hard shellSee-through case: the design floats on the phoneSee-through case with built-in magnets
Available for iPhone 14 PlusYesYesYesYesYesYes

Materials and protection details come from verified product data on each product page.

Made for the iPhone 14 Plus

Apple introduced the iPhone 14 Plus in September 2022. It has a 6.7-inch display. On the back: Dual 12MP cameras (Main, Ultra Wide).

A case for the iPhone 14 Plus is cut for its body, 160.8 × 78.1 × 7.8 mm, and for its camera layout, so a case made for another model will not line up. To check your model, open Settings › General › About on the phone and tap the part number next to Model Number: it changes to the model number, which starts with A. The model numbers of the iPhone 14 Plus are A2632, A2885, A2888, A2887, and A2886.

The iPhone 14 Plus supports MagSafe.

Related models, each with its own case

Introduced
September 2022
Display
6.7-inch
Rear cameras
Dual 12MP cameras (Main, Ultra Wide)
Size
160.8 × 78.1 × 7.8 mm
Charging
MagSafe and Qi
Port
Lightning
MagSafe
Yes
Model numbers
A2632, A2885, A2888, A2887, A2886

Sources: support.apple.com, Apple Newsroom

About iPhone 14 Plus Cases

An iPhone 14 Plus case, not a Pro Max one

The iPhone 14 Plus and iPhone 14 Pro Max are both 2022 phones, but they take different cases, and the 14 Plus is also separate from the standard iPhone 14 and the 14 Pro. Every iPhone 14 Plus case on this page is made for the Plus. Confirm under Settings › General › About before ordering, since each case is printed to order and cannot be returned when the model chosen was not the right one.

Light options: Slim and the iPhone 14 Plus wallet case

Slim is a lightweight one-piece polycarbonate shell that guards against scratches. Its design wraps around the edges in UV-protected color, it supports wireless charging and it leaves clear, open ports. Card holder, an iPhone 14 Plus wallet case, keeps a similar slim, lightweight profile and adds one card slot and MagSafe compatibility. If you later want more structure, Tough adds a TPU liner and raised edges, and MagSafe compatible pairs those two layers with a magnetic module.

Pairing prints with Tough, Slim or an iPhone 14 Plus clear case

Some prints and builds pair naturally. A tropical or fruit design wrapped round a Tough or Slim case gives color on every side. A minimal or botanical print on an iPhone 14 Plus clear case, Clear or Clear MagSafe, leaves space for the phone to show through. Camo and animal print fill a MagSafe compatible case edge to edge. These are suggestions only; any combination offered on the product page can be ordered as an iPhone 14 Plus case, printed after you order.

Not sure which model you have? The device guide shows where to find it.

iPhone 14 Plus Cases: questions & answers

Fit, builds, production and delivery — what people ask before they order.

Does an iPhone 14 case fit the 14 Plus?

No. The iPhone 14 and iPhone 14 Plus take separate cases, and we make each listing for one model. Check Settings › General › About to see which you have, then choose iPhone 14 Plus on the product page if that is the name shown.

Can I charge my iPhone 14 Plus without taking the case off?

Yes with Tough, Slim and Clear, which are listed as wireless charging compatible. MagSafe compatible supports MagSafe charging through its magnetic module. Clear MagSafe and Card holder have built-in magnets for MagSafe accessories.

What is TPU, and where is it used?

TPU is a flexible material used to cushion and absorb shock. In Tough and MagSafe compatible it forms the inner liner that absorbs shock from impacts, and in Clear and Clear MagSafe it cushions the sides and edges around the clear back.

Is Card holder MagSafe compatible?

Yes. Card holder is listed as MagSafe compatible, alongside a card slot on the back for one card and a slim, lightweight polycarbonate body. The print covers the exterior as a 3D wrap, glossy or matte, and the ports are clear and open.

Why are 14 Plus cases made to order?

Printing each case after it is ordered lets us offer every collection for the iPhone 14 Plus in each build. It also means the case is made for your exact model, which is why a wrong-model order cannot be returned.

When will it arrive?

Production and shipping times are shown at checkout before you pay. Your case is printed after ordering, so the estimate includes production, and you can look it over calmly before you confirm the purchase.

What cases fit the iPhone 14 Plus?

The cases on this page, each made for the iPhone 14 Plus: Tough, Slim, Card holder, MagSafe compatible, Clear and Clear MagSafe. Pick a design and a build, and the case is printed for the iPhone 14 Plus after you order.

Do iPhone 14 Plus cases fit the iPhone 15 Plus?

We would not count on it. Our cases are produced one model at a time, and the iPhone 14 Plus and iPhone 15 Plus are listed separately. Choose the model your phone shows in Settings › General › About; a case printed for the wrong one cannot be sent back.

Do you have cute iPhone 14 Plus cases?

Yes. Our Cute collection gathers the playful prints, such as Kawaii Desserts, Meow Pastel Cats and Pink Bow Pattern, and each of them is made for the iPhone 14 Plus. Open a design, pick your case type and finish, and it is printed to order.

iPhone 14 Plus guides

Shop by style

Ask an AI about us

See what AI says about YOONIG

Opens the assistant with a question about this page already typed.