Will an iPhone 13 case fit an iPhone 14 (and the other way round)?
The iPhone 13 and 14 share the same height and width, but not the same camera or depth. What that means for cases, in both directions, plus the Pro models.
Written by the YOONIG team · Editorially reviewed · Updated · 3 min read
The short answer
Not properly. Apple lists the same height and width for both (146.7 mm × 71.5 mm), so a case can look like it should fit, but the iPhone 14 is slightly thicker (7.8 mm against 7.65 mm) and its rear camera module is larger.
A 13 case on a 14 tends to sit on the bigger camera bump instead of around it. A 14 case on a 13 goes on, but the camera opening and the button cut-outs are made for the other phone, so the fit is loose where it matters. Buy the case for the phone you have.
Side by side
Official dimensions from the manufacturer. Dimensions alone don’t decide fit: camera position, button placement and cut-outs matter just as much.
Sources: iPhone 13 specs, iPhone 14 specs.
| Spec | iPhone 13 | iPhone 14 |
|---|---|---|
| Height | 146.7 mm | 146.7 mm |
| Width | 71.5 mm | 71.5 mm |
| Depth | 7.65 mm | 7.8 mm |
| Screen | 6.1-inch | 6.1-inch |
| Charging port | Lightning | Lightning |
| Side buttons | Ring/silent switch | Ring/silent switch |
| MagSafe | Yes | Yes |
What actually changes between them
These are the differences a case has to follow. Any one of them is enough to stop a case sitting flat, covering a button or lining up with the camera.
- The iPhone 14 is 0.15 mm thicker than the iPhone 13
iPhone 13 Pro and iPhone 14 Pro
Here the answer is a clearer no. The iPhone 14 Pro is 0.8 mm taller than the 13 Pro (147.5 mm against 146.7 mm) and thicker, with a larger camera array, so the cases are not interchangeable either way.
| Spec | iPhone 13 Pro | iPhone 14 Pro |
|---|---|---|
| Height | 146.7 mm | 147.5 mm |
| Width | 71.5 mm | 71.5 mm |
| Depth | 7.65 mm | 7.85 mm |
| Screen | 6.1-inch | 6.1-inch |
| Charging port | Lightning | Lightning |
| Side buttons | Ring/silent switch | Ring/silent switch |
| MagSafe | Yes | Yes |
Does an iPhone 13 Pro case fit an iPhone 13?
They share the same official height, width and depth (146.7 mm × 71.5 mm × 7.65 mm), but the 13 Pro has three rear cameras in a much larger module and the 13 has two. A 13 Pro case will leave a big open window on a 13; a 13 case won’t go over a 13 Pro’s cameras. Treat them as different phones.
Why “almost fits” isn’t good enough
A case that nearly fits can press a side button all the time, leave a gap at one corner where the phone can pop out when dropped, or sit on the camera rim so the lenses touch the table. A raised edge around the camera only protects if it surrounds the lenses exactly.
Every YOONIG case is cut for one model, so the print, the openings and the raised edges line up with that phone. If you are not sure which model you have, our guide to finding your exact model takes a minute.
Find the right case
Shop cases made for each phone: iPhone 13 cases, iPhone 14 cases.
Frequently asked questions
Are the iPhone 13 and 14 the same size?
Almost. Apple lists the same height (146.7 mm) and width (71.5 mm), but the iPhone 14 is 0.15 mm thicker and has a larger camera module.
Will an iPhone 14 case fit an iPhone 13?
It will usually go on, but it is made for the 14’s camera and buttons, so the openings won’t line up exactly and the fit is looser. A case made for the iPhone 13 is the better choice.
Are iPhone 13 and 14 cases the same?
No. Case makers sell them as separate models because the camera module and depth differ, even though height and width are the same.
Will an iPhone 14 Pro case fit an iPhone 13 Pro?
No. The 14 Pro is taller (147.5 mm against 146.7 mm) and has a bigger camera array.
Will an iPhone 14 Pro case fit an iPhone 14?
No. The 14 Pro is a different size (147.5 mm × 71.5 mm) with three rear cameras; the iPhone 14 has two.
Shop the story
Paris Night Phone case$29.00Phone case · choose your model
Kanagawa Wave Phone case$29.00Phone case · choose your model
Cherry Phone case$29.00Phone case · choose your model
