Skip to content
Fit guide

Will an iPhone 15 Pro case fit an iPhone 16 Pro?

The iPhone 16 Pro grew to 6.3 inches: 3 mm taller and 0.9 mm wider than the 15 Pro, plus a Camera Control on the side. A 15 Pro case can't follow.

Written by the YOONIG team · Updated · 5 min read

iPhone 15 Pro beside the taller iPhone 16 Pro, seen from the back

The 16 Pro is 3 mm too tall for a 15 Pro case

No. An iPhone 15 Pro case won't fit an iPhone 16 Pro. The 16 Pro is 149.6 × 71.5 × 8.25 mm and the 15 Pro is 146.6 × 70.6 × 8.25 mm, so the newer phone is 3.0 mm taller and 0.9 mm wider. It doesn't go into the case. The 16 Pro also has a Camera Control on its right side, which the 15 Pro doesn't have.

Depth is the one figure that didn't change. That's no help when the phone overhangs the case by 3 mm at one end.

iPhone 15 Pro vs iPhone 16 Pro, line by line

Left column: Apple: iPhone 15 Pro technical specifications. Right column: Apple: iPhone 16 Pro technical specifications.

The two phones are close relatives in materials and controls. Both have a titanium frame with contoured edges, an Action button and a USB-C connector. The size is what separates them.

iPhone 15 Pro and iPhone 16 Pro, official figures from Apple
SpeciPhone 15 ProiPhone 16 ProChange
Height146.6 mm149.6 mm3.0 mm taller
Width70.6 mm71.5 mm0.9 mm wider
Depth8.25 mm8.25 mmNone
Weight187 g199 g12 g heavier
Display6.1-inch6.3-inchLarger
Rear camerasThree, with 3x TelephotoThree, with 5x TelephotoLonger telephoto
Upper left sideAction buttonAction buttonSame control
Lower right sideNothingCamera ControlNew
ConnectorUSB-CUSB-CSame
MagSafe chargingUp to 15WUp to 25W with a 30W adapter or higherFaster

Where the extra size went

Apple's iPhone 16 Pro announcement introduces 'larger display sizes: 6.3 inches on iPhone 16 Pro and 6.9 inches on iPhone 16 Pro Max' and describes the thinnest borders on any Apple product. The screen grew by 0.2 inches on the diagonal, and the body grew with it.

For a case, 3 mm in height is not a near miss. Our Tough and Slim cases are built around a polycarbonate shell molded to one outline, with corners that wrap the phone's corners. A phone 3 mm longer than that outline can't sit inside both ends at once, so the case never closes over it.

The reverse fails in the opposite way. A 15 Pro inside a 16 Pro case has 3 mm of travel end to end and nearly a millimeter side to side. It slides until the camera hits the edge of its opening.

Camera Control: the button a 15 Pro case has no place for

Apple: Identify your iPhone model places the Camera Control on the lower right side of the 16 Pro, the same side as the side button. Apple describes it as having a tactile switch that powers the click, and it also reads finger movements across its surface.

That second part is why it needs more than a hole or a stiff cover. Apple says its own cases for the 16 lineup use a sapphire crystal coupled to a conductive layer to pass finger movements through to the control. Cases from other makers handle it with an opening or a purpose-made cover. Either way, the case has to be designed around a control at that exact spot, and a 15 Pro case has a plain wall there.

Everything else on the sides carries the same name on both phones: Action button on the upper left, volume buttons, side button on the right. Same names doesn't mean same positions on a body that's 3 mm longer, and Apple's dimensional drawings give each model its own set of measurements.

Phones that share numbers with the 16 Pro

Two newer phones come close to the 16 Pro on paper, which matters if you're thinking about keeping a 16 Pro case for a later upgrade.

The iPhone 17 has the same height and width as the 16 Pro, 149.6 × 71.5 mm, but it's 0.3 mm thinner and has two cameras where the 16 Pro has three. The 17 Pro is 0.4 mm taller, 0.4 mm wider and 0.5 mm thicker. Neither takes a 16 Pro case, and the second pair is covered in will an iPhone 16 Pro case fit an iPhone 17 Pro.

The Pro line around the 16 Pro, official dimensions
ModelHeightWidthDepthDisplay
iPhone 14 Pro147.5 mm71.5 mm7.85 mm6.1-inch
iPhone 15 Pro146.6 mm70.6 mm8.25 mm6.1-inch
iPhone 16 Pro149.6 mm71.5 mm8.25 mm6.3-inch
iPhone 17149.6 mm71.5 mm7.95 mm6.3-inch
iPhone 17 Pro150.0 mm71.9 mm8.75 mm6.3-inch

What to buy for a 16 Pro, and what to do with the 15 Pro case

Order from iPhone 16 Pro cases. The 16 Pro is one of the few phones we make our MagSafe case with a camera guard for: a TPU frame and polycarbonate back, with the camera area built into the frame, air-cushioned corners and the magnets set in the frame. The two-layer MagSafe phone cases without the camera guard are there too, along with Tough, Slim, Clear and Card holder builds.

If the 15 Pro is being handed down or sold, the case goes with it. We make iPhone 15 Pro cases in Tough, Slim, Clear, Card holder and MagSafe builds, if the next owner wants a fresh design.

Your MagSafe accessories and USB-C cables move over unchanged, since both phones have MagSafe and USB-C. For the larger pair from the same years, see will a 15 Pro Max case fit a 16 Pro Max. The standard phones took a different route, with matching dimensions and a changed camera, explained in will an iPhone 15 case fit an iPhone 16.

Frequently asked questions

Are the iPhone 15 Pro and 16 Pro the same size?

No. The 15 Pro is 146.6 × 70.6 × 8.25 mm with a 6.1-inch display. The 16 Pro is 149.6 × 71.5 × 8.25 mm with a 6.3-inch display. Only the depth matches.

Will an iPhone 16 Pro case fit an iPhone 15 Pro?

No. The 15 Pro is 3.0 mm shorter and 0.9 mm narrower than the case, so it slides around inside, and the camera and buttons don't line up with the openings.

Can I stretch a soft 15 Pro case over a 16 Pro?

We wouldn't. Even a flexible case is molded to one outline, and 3 mm of extra height leaves the corners and the camera opening in the wrong place and the Camera Control covered.

Does a 16 Pro case need a cut-out for the Camera Control?

It needs either an opening or a cover designed for it. The control responds to clicks and to finger movements across its surface, so a plain wall of case material over it blocks at least part of what it does.

Will an iPhone 15 Pro case fit an iPhone 15?

No. The 15 is 147.6 × 71.6 × 7.8 mm, which is 1.0 mm taller and 1.0 mm wider than the 15 Pro, and it has two rear cameras and a Ring/Silent switch.

Find a case made for your exact iPhone Pro

Shop the story

Cases for the models in this guide

Keep reading