Skip to content

70s Retro Swirl Galaxy S25+ Case

The 70s Retro Swirl Galaxy S25+ case is a retro phone case made for the Galaxy S25+, with the camera, button and port openings placed for that model. Choose Tough or Slim. Each one comes in a glossy or matte finish and is printed only when you order it.

$35.00USD · taxes and shipping calculated at checkout

Device

Finish: Glossy

Case type: Tough

  • Raised camera & screen edges
  • Two-layer protection
  • Wireless charging

Also in 70s Retro Swirl

Complete the look
1
  • Made to orderPrinted after you order, usually within 2–7 business days, then 3–7 business days for standard delivery in the US. Checkout shows the dates for your address before you pay.
  • Shipping, shown separatelyCarrier options and delivery estimate appear once you enter your address.
  • ReturnsRead the returns policy before you order.
Description

Pastel swirls with a 1970s feel

This design is made of bold pastel swirls that loop and flow across the surface. The soft colors and rounded, wavy shapes give it a funky, laid-back vintage vibe inspired by 1970s graphics.

Choose your build above:

  • Tough — a printed hard back over a shock-absorbing inner layer, with raised edges around the screen and camera. Supports wireless charging. For iPhone, Samsung Galaxy and Google Pixel.
  • Slim — a one-piece polycarbonate snap case, slim and lightweight. Supports wireless charging. For iPhone and Samsung Galaxy.
  • MagSafe — two-layer protection with a built-in magnet ring for MagSafe chargers and accessories. For iPhone.
  • MagSafe + camera guard — a TPU frame with a polycarbonate back, a raised surround around the camera and built-in MagSafe-compatible magnets. For iPhone.
  • Card holder — an impact-resistant polycarbonate case with a slot for one card. For iPhone.
  • Glossy or matte print finish
  • Printed to order for your exact phone model

This phone case is printed after you order it, so the print is fresh and matched to the option you choose.

Compatibility

Made for Galaxy S25+. Cutouts and dimensions are specific to this model.

Switching your device updates this page; items already in your bag stay as they are.

Materials & finish

Tough

  • Outer shell: 100% polycarbonate, resists daily impacts
  • Inner liner: 100% TPU that absorbs shock from impacts
  • Dual-layer construction
  • Design printed round the edges (3D wrap), UV-protected against outdoor weathering
  • Wireless charging compatible (not MagSafe)
  • Glossy or matte finish
  • Clear, open ports
Print quality

Prints are produced from the original artwork file at full resolution. Colors on screen can vary slightly from the printed result.

Shipping

Made to order. Production time is confirmed at checkout, separately from the carrier delivery estimate.

Returns

Damaged, defective or misprinted? Contact us within 30 days of delivery for a free replacement or a full refund. Every case is printed for your order, so we can’t take it back for a change of mind or a wrong model once it’s printed.

Care

Clean with a soft, damp cotton or microfiber cloth. Avoid using chemicals.

70s Retro Swirl Galaxy S25+ Case

$35.00

The design

70s Retro Swirl

This design is made of bold pastel swirls that loop and flow across the surface. The soft colors and rounded, wavy shapes give it a funky, laid-back vintage vibe inspired by 1970s graphics.

Shop the 70s Retro Swirl design
70s Retro Swirl pattern

Made for the Galaxy S25+

The Galaxy S25+ went on sale in February 2025. It has a 6.7-inch display. On the back: Triple camera — 50MP wide, 12MP ultra wide, 10MP 3x telephoto.

A case for the Galaxy S25+ is cut for its body, 158.4 × 75.8 × 7.3 mm, and for its camera layout, so a case made for another model will not line up. To check your model, open Settings › About phone; it shows the model name and the model number that starts with SM-. The model numbers of the Galaxy S25+ are SM-S936U and SM-S936U1.

Related models, each with its own case

On sale since
February 2025
Display
6.7-inch
Rear cameras
Triple camera: 50MP wide, 12MP ultra wide, 10MP 3x telephoto
Size
158.4 × 75.8 × 7.3 mm
Charging
Fast Wireless Charging 2.0, Wireless PowerShare
Model numbers
SM-S936U, SM-S936U1

Complete the set

70s Retro Swirl on other products. Only items compatible with your selection are shown.

View design

Reviews

No reviews yet for our phone cases.

Only customers with a verified order can leave a review.

    Questions & answers

    Answers come from the YOONIG team. Questions are checked before they appear.

    • Will the 70s Retro Swirl case fit my Galaxy S25+?

      Yes. This case is made for the Galaxy S25+ only: it is cut for its 158.4 × 75.8 × 7.3 mm body and its camera layout (Triple camera — 50MP wide, 12MP ultra wide, 10MP 3x telephoto). It fits model numbers SM-S936U, SM-S936U1. To check your model, open Settings › About phone; it shows the model name and the model number that starts with SM-. Cases for other models, even close ones like the Plus, Pro or Max, won’t line up.

    • What does the 70s Retro Swirl print look like?

      This design is made of bold pastel swirls that loop and flow across the surface. The soft colors and rounded, wavy shapes give it a funky, laid-back vintage vibe inspired by 1970s graphics.

    • Which 70s Retro Swirl case type should I choose for the Galaxy S25+?

      For the Galaxy S25+ you can pick 2 builds. Tough: two-layer case with raised edges. Slim: lightweight hard shell. Every build carries the same 70s Retro Swirl print.

    • Is the 70s Retro Swirl print available on other products?

      Yes. The same 70s Retro Swirl print is also made as an AirTag case, a MacBook case, a Kindle case and an AirPods case, with the scale and placement adjusted to each one. They are under “Also in 70s Retro Swirl” on this page.

    You may also like

    Ask an AI about us

    See what AI says about YOONIG

    Opens the assistant with a question about this page already typed.