Skip to content

Blue Zebra Waves iPhone 16 Pro Case

The Blue Zebra Waves iPhone 16 Pro case is an animal print phone case made for the iPhone 16 Pro, with the camera, button and port openings placed for that model. The print shows wavy stripes, brush strokes and swirls. Choose Tough, MagSafe compatible, MagSafe + camera guard, Card holder or Slim — the MagSafe builds snap onto magnetic chargers, wallets and mounts. Each one comes in a glossy or matte finish and is printed only when you order it.

$35.00USD · taxes and shipping calculated at checkout

Device

Finish: Glossy

Case type: Tough

  • Raised camera & screen edges
  • Two-layer protection
  • Wireless charging
1
  • Made to orderPrinted after you order, usually within 2–7 business days, then 3–7 business days for standard delivery in the US. Checkout shows the dates for your address before you pay.
  • Shipping, shown separatelyCarrier options and delivery estimate appear once you enter your address.
  • ReturnsRead the returns policy before you order.
Description

The Blue Zebra Waves print shows wavy stripes, brush strokes and swirls.

Builds offered for the iPhone 16 Pro

  • Tough — a printed hard back over a shock-absorbing inner layer, with raised edges around the screen and camera. Supports wireless charging.
  • MagSafe compatible — two-layer protection with a built-in magnet ring for MagSafe chargers and accessories.
  • MagSafe + camera guard — a TPU frame with a polycarbonate back, a raised surround around the camera and built-in MagSafe-compatible magnets.
  • Card holder — an impact-resistant polycarbonate case with a slot for one card. MagSafe compatible.
  • Slim — a one-piece polycarbonate snap case, slim and lightweight. Supports wireless charging.
  • Glossy or matte print finish
  • Printed to order for the iPhone 16 Pro
Compatibility

Made for iPhone 16 Pro. Cutouts and dimensions are specific to this model.

Materials & finish

Tough

  • Outer shell: 100% polycarbonate, resists daily impacts
  • Inner liner: 100% TPU that absorbs shock from impacts
  • Dual-layer construction
  • Design printed round the edges (3D wrap), UV-protected against outdoor weathering
  • Wireless charging compatible (not MagSafe)
  • Glossy or matte finish
  • Clear, open ports
Print quality

Prints are produced from the original artwork file at full resolution. Colors on screen can vary slightly from the printed result.

Returns

Damaged, defective or misprinted? Contact us within 30 days of delivery for a free replacement or a full refund. Every phone case is printed for your order, so we can’t take it back for a change of mind or a wrong model once it’s printed.

Care

Clean with a soft, damp cotton or microfiber cloth. Avoid using chemicals.

Blue Zebra Waves iPhone 16 Pro Case

$35.00

The design

Blue Zebra Waves

Thick, wavy lines in bright cobalt blue curve across the case in every direction, forming loops, branches and long ribbons like zebra stripes or the grain in marble. The strokes have rough, dry-brush edges, so they look like loose strokes of ink. In places, the lines join into wider blue areas before splitting again.

The background is a warm ivory cream, and the print uses only these two colors. The scale is medium and the pattern is busy but balanced. The mood is bold, artsy and fresh, a little like blue and white pottery or a modern art print. It pairs well with denim, white linen and gold jewelry, and suits anyone who loves blue, coastal style or abstract art.

Blue Zebra Print Phone Case with Cobalt Waves on Ivory

This blue zebra phone case has bold cobalt brush strokes swirling over ivory. The wavy lines look painted with ink, with rough dry edges. It is fresh, artsy and easy to spot.

It is a modern blue and white zebra phone case and also works as a blue swirl phone case. Choose it as a zebra iphone case, a blue samsung case or a Pixel case. This cobalt blue phone case pairs well with denim and white linen. It suits anyone who likes abstract art or coastal colors.

This print features: wavy stripes, brush strokes, swirls

Shop the Blue Zebra Waves design
Blue Zebra Waves print

Made for the iPhone 16 Pro

A case for the iPhone 16 Pro is cut for its body, 149.6 × 71.5 × 8.25 mm, and for its camera layout, so a case made for another model will not line up. To check your model, open Settings › General › About on the phone and tap the part number next to Model Number: it changes to the model number, which starts with A.

The iPhone 16 Pro supports MagSafe. MagSafe compatible and MagSafe + camera guard have magnets built in, so MagSafe chargers and mounts hold through the case; Tough and Slim have no magnet ring. Card holder is MagSafe compatible.

Related models, each with its own case

Introduced
September 2024
Display
6.3-inch
Rear cameras
Pro camera system: 48MP Fusion, 48MP Ultra Wide, 12MP 5x Telephoto
Size
149.6 × 71.5 × 8.25 mm
Charging
MagSafe, Qi2 and Qi
Port
USB-C
MagSafe
Yes
Model numbers
A3083, A3292, A3294, A3293

Sources: support.apple.com, Apple Newsroom

Reviews

No reviews yet for our phone cases.

Only customers with a verified order can leave a review.

    Questions & answers

    Answers come from the YOONIG team. Questions are checked before they appear.

    • Will the Blue Zebra Waves case fit my iPhone 16 Pro?

      Yes. This case is made for the iPhone 16 Pro only, cut for its body and camera layout. It fits model numbers A3083, A3292, A3294, A3293. Cases for other models, even close ones like the iPhone 16 Pro Max, iPhone 16 Plus or iPhone 16, won’t line up.

    • Is the Blue Zebra Waves iPhone 16 Pro case MagSafe compatible?

      The iPhone 16 Pro supports MagSafe, and the MagSafe compatible build (magnet ring for MagSafe accessories) and MagSafe + camera guard build (two-layer MagSafe case with a raised camera surround) of this case have magnets built in, so MagSafe chargers, wallets and mounts hold through it. Card holder is MagSafe compatible too. The other builds offered here have no magnet ring.

    • Which Blue Zebra Waves case type should I choose for the iPhone 16 Pro?

      For the iPhone 16 Pro you can pick 5 builds. Tough: two-layer case with raised edges. MagSafe compatible: magnet ring for MagSafe accessories. MagSafe + camera guard: two-layer MagSafe case with a raised camera surround. Card holder: slim case with a slot for one card. Slim: lightweight hard shell. Each one carries the same Blue Zebra Waves print.

    • Is the blue zebra case a real zebra print?

      It is a wavy zebra-style stripe in cobalt blue on ivory, more swirly and painterly than a classic black and white zebra.

    • What colors are in the blue zebra waves case?

      Only two colors are used: bright cobalt blue and warm ivory cream.

    You may also like

    Ask an AI about us

    See what AI says about YOONIG

    Opens the assistant with a question about this page already typed.