Skip to content

Raspberry Red Polka Dots iPhone 18 Pro Case

The Raspberry Red Polka Dots iPhone 18 Pro case is a retro, pink and geometric phone case made for the iPhone 18 Pro, with the camera, button and port openings placed for that model. The print shows polka dots, pink circles and burgundy background. Choose Tough, MagSafe compatible, MagSafe + camera guard, Card holder or Slim — the MagSafe builds snap onto magnetic chargers, wallets and mounts. Each one comes in a glossy or matte finish and is printed only when you order it.

$35.00USD · taxes and shipping calculated at checkout

Device

Finish: Glossy

Case type: Tough

  • Raised camera & screen edges
  • Two-layer protection
  • Wireless charging
1
  • Made to orderPrinted after you order, usually within 2–7 business days, then 3–7 business days for standard delivery in the US. Checkout shows the dates for your address before you pay.
  • Shipping, shown separatelyCarrier options and delivery estimate appear once you enter your address.
  • ReturnsRead the returns policy before you order.
Description

The Raspberry Red Polka Dots print shows polka dots, pink circles and burgundy background.

Builds offered for the iPhone 18 Pro

  • Tough — a printed hard back over a shock-absorbing inner layer, with raised edges around the screen and camera. Supports wireless charging.
  • MagSafe compatible — two-layer protection with a built-in magnet ring for MagSafe chargers and accessories.
  • MagSafe + camera guard — a TPU frame with a polycarbonate back, a raised surround around the camera and built-in MagSafe-compatible magnets.
  • Card holder — an impact-resistant polycarbonate case with a slot for one card. MagSafe compatible.
  • Slim — a one-piece polycarbonate snap case, slim and lightweight. Supports wireless charging.
  • Glossy or matte print finish
  • Printed to order for the iPhone 18 Pro
Compatibility

Made for iPhone 18 Pro. Cutouts and dimensions are specific to this model.

Materials & finish

Tough

  • Outer shell: 100% polycarbonate, resists daily impacts
  • Inner liner: 100% TPU that absorbs shock from impacts
  • Dual-layer construction
  • Design printed round the edges (3D wrap), UV-protected against outdoor weathering
  • Wireless charging compatible (not MagSafe)
  • Glossy or matte finish
  • Clear, open ports
Print quality

Prints are produced from the original artwork file at full resolution. Colors on screen can vary slightly from the printed result.

Returns

Damaged, defective or misprinted? Contact us within 30 days of delivery for a free replacement or a full refund. Every phone case is printed for your order, so we can’t take it back for a change of mind or a wrong model once it’s printed.

Care

Clean with a soft, damp cotton or microfiber cloth. Avoid using chemicals.

Raspberry Red Polka Dots iPhone 18 Pro Case

$35.00

The design

Raspberry Red Polka Dots

Large round dots fill the surface in an offset grid, sitting so close that they almost touch. The dots are a bright raspberry pink with a soft mottled texture, like printed fabric. The background shows only as thin wine red lines between them, which makes the whole pattern look dense and rich.

The palette is raspberry pink and deep burgundy red. The mood is cheerful, bold and a little retro, like a 50s dress or a vintage scarf. It pairs with red lipstick, black and white outfits, denim and gold jewelry. It also suits Valentine's Day and cherry or berry themed styles. From a distance the dots blend into a warm pink and red texture, and up close the round shapes and print grain come through clearly.

Red Polka Dot Phone Case with Raspberry Pink Dots on Burgundy

This polka dot phone case packs big raspberry dots onto a deep wine red base. It reads as both a red polka dot phone case and a pink polka dot phone case. The dots sit close together, so the pattern feels bold and full.

The retro phone case look recalls 50s dresses and vintage scarves. As a burgundy phone case, it pairs well with black, denim and gold. It also makes a sweet valentines phone case. Choose it as a polka dot iphone case, a polka dot samsung case or a Google Pixel case. It is a fun red phone case for dot lovers.

This print features: polka dots, pink circles, burgundy background

Shop the Raspberry Red Polka Dots design
Raspberry Red Polka Dots print

Made for the iPhone 18 Pro

A case for the iPhone 18 Pro is cut for its body, 150 × 71.9 × 8.75 mm, and for its camera layout, so a case made for another model will not line up. To check your model, open Settings › General › About on the phone and tap the part number next to Model Number: it changes to the model number, which starts with A.

The iPhone 18 Pro supports MagSafe. MagSafe compatible and MagSafe + camera guard have magnets built in, so MagSafe chargers and mounts hold through the case; Tough and Slim have no magnet ring. Card holder is MagSafe compatible.

Related models, each with its own case

Introduced
September 2026
Display
6.3-inch
Rear cameras
Pro Fusion camera system: 48MP Fusion Main, 48MP Fusion Ultra Wide, 48MP Fusion Telephoto
Size
150 × 71.9 × 8.75 mm
Charging
MagSafe and Qi2
Port
USB-C
MagSafe
Yes
Model numbers
A3472, A3713, A3715, A3714

Sources: support.apple.com, Apple Newsroom

Reviews

No reviews yet for our phone cases.

Only customers with a verified order can leave a review.

    Questions & answers

    Answers come from the YOONIG team. Questions are checked before they appear.

    • Will the Raspberry Red Polka Dots case fit my iPhone 18 Pro?

      Yes. This case is made for the iPhone 18 Pro only, cut for its body and camera layout. It fits model numbers A3472, A3713, A3715, A3714. Cases for other models, even close ones like the iPhone 18 Pro Max, won’t line up.

    • Is the Raspberry Red Polka Dots iPhone 18 Pro case MagSafe compatible?

      The iPhone 18 Pro supports MagSafe, and the MagSafe compatible build (magnet ring for MagSafe accessories) and MagSafe + camera guard build (two-layer MagSafe case with a raised camera surround) of this case have magnets built in, so MagSafe chargers, wallets and mounts hold through it. Card holder is MagSafe compatible too. The other builds offered here have no magnet ring.

    • Which Raspberry Red Polka Dots case type should I choose for the iPhone 18 Pro?

      For the iPhone 18 Pro you can pick 5 builds. Tough: two-layer case with raised edges. MagSafe compatible: magnet ring for MagSafe accessories. MagSafe + camera guard: two-layer MagSafe case with a raised camera surround. Card holder: slim case with a slot for one card. Slim: lightweight hard shell. Each one carries the same Raspberry Red Polka Dots print.

    • What colors are the polka dots?

      The dots are raspberry pink, set close together on a deep burgundy red background.

    • Is the raspberry polka dot case good for Valentine's Day?

      Yes. The pink and red colors suit Valentine's Day and other romantic, red-themed outfits.

    You may also like

    Ask an AI about us

    See what AI says about YOONIG

    Opens the assistant with a question about this page already typed.