Honeybees on Gingham iPhone 18 Pro Max Case
The Honeybees on Gingham iPhone 18 Pro Max case is a phone case made for the iPhone 18 Pro Max, with the camera, button and port openings placed for that model. The print shows honeybees, gingham check and wings. Choose Tough, MagSafe compatible, MagSafe + camera guard, Card holder or Slim — the MagSafe builds snap onto magnetic chargers, wallets and mounts. Each one comes in a glossy or matte finish and is printed only when you order it.
Device
Finish: Glossy
Case type: Tough
- Raised camera & screen edges
- Two-layer protection
- Wireless charging
- Made to orderPrinted after you order, usually within 2–7 business days, then 3–7 business days for standard delivery in the US. Checkout shows the dates for your address before you pay.
- Shipping, shown separatelyCarrier options and delivery estimate appear once you enter your address.
- ReturnsRead the returns policy before you order.
Description
The Honeybees on Gingham print shows honeybees, gingham check and wings.
Builds offered for the iPhone 18 Pro Max
- Tough — a printed hard back over a shock-absorbing inner layer, with raised edges around the screen and camera. Supports wireless charging.
- MagSafe compatible — two-layer protection with a built-in magnet ring for MagSafe chargers and accessories.
- MagSafe + camera guard — a TPU frame with a polycarbonate back, a raised surround around the camera and built-in MagSafe-compatible magnets.
- Card holder — an impact-resistant polycarbonate case with a slot for one card. MagSafe compatible.
- Slim — a one-piece polycarbonate snap case, slim and lightweight. Supports wireless charging.
- Glossy or matte print finish
- Printed to order for the iPhone 18 Pro Max
Compatibility
Made for iPhone 18 Pro Max. Cutouts and dimensions are specific to this model.
Materials & finish
Tough
- Outer shell: 100% polycarbonate, resists daily impacts
- Inner liner: 100% TPU that absorbs shock from impacts
- Dual-layer construction
- Design printed round the edges (3D wrap), UV-protected against outdoor weathering
- Wireless charging compatible (not MagSafe)
- Glossy or matte finish
- Clear, open ports
Print quality
Prints are produced from the original artwork file at full resolution. Colors on screen can vary slightly from the printed result.
Returns
Damaged, defective or misprinted? Contact us within 30 days of delivery for a free replacement or a full refund. Every phone case is printed for your order, so we can’t take it back for a change of mind or a wrong model once it’s printed.
Care
Clean with a soft, damp cotton or microfiber cloth. Avoid using chemicals.
Honeybees on Gingham iPhone 18 Pro Max Case
$35.00
Honeybees on Gingham
About thirty small honeybees are scattered across the case in every direction. Each one has a fuzzy gold and black striped body, thin legs and pale gray-blue wings, painted with soft, realistic detail. They are evenly spaced, so the pattern feels busy but never crowded.
The background is a gingham check in caramel and honey tones on a cream base, with slightly uneven painted lines, like a hand-dyed tablecloth. The palette is warm golds, browns and cream with small touches of black. The bees are small enough that many show on any phone. The mood is cozy and cheerful, like a farmhouse kitchen in late summer. It pairs with mustard, cream, brown and denim outfits and gold jewelry. It suits beekeepers, gardeners, honey fans and anyone who loves cottagecore style.
Honeybees on Honey Gingham Bee Phone Case in Warm Gold Tones
This bee phone case scatters little honeybees over a warm honey gingham. It is a sweet honey bee phone case with soft golden tones. The bees face every direction, as if in flight.
Choose it as a bee iphone case, a bee samsung case or for Google Pixel. Fans of a yellow gingham phone case will like the caramel and cream check. It fits cottagecore phone case style and farmhouse decor. It also makes a sweet gift for bee lovers, gardeners and honey fans.
This print features: honeybees, gingham check, wings
Shop the Honeybees on Gingham design
Made for the iPhone 18 Pro Max
A case for the iPhone 18 Pro Max is cut for its body, 163.4 × 78 × 8.75 mm, and for its camera layout, so a case made for another model will not line up. To check your model, open Settings › General › About on the phone and tap the part number next to Model Number: it changes to the model number, which starts with A.
The iPhone 18 Pro Max supports MagSafe. MagSafe compatible and MagSafe + camera guard have magnets built in, so MagSafe chargers and mounts hold through the case; Tough and Slim have no magnet ring. Card holder is MagSafe compatible.
Related models, each with its own case
- iPhone 18 Pro cases · 6.3-inch, Pro Fusion camera system
- Introduced
- September 2026
- Display
- 6.9-inch
- Rear cameras
- Pro Fusion camera system: 48MP Fusion Main, 48MP Fusion Ultra Wide, 48MP Fusion Telephoto
- Size
- 163.4 × 78 × 8.75 mm
- Charging
- MagSafe and Qi2
- Port
- USB-C
- MagSafe
- Yes
- Model numbers
- A3473, A3716, A3718, A3717
Sources: support.apple.com, Apple Newsroom
Reviews
No reviews yet for our phone cases.
Only customers with a verified order can leave a review.
Questions & answers
Answers come from the YOONIG team. Questions are checked before they appear.
Will the Honeybees on Gingham case fit my iPhone 18 Pro Max?
Yes. This case is made for the iPhone 18 Pro Max only, cut for its body and camera layout. It fits model numbers A3473, A3716, A3718, A3717. Cases for other models, even close ones like the iPhone 18 Pro, won’t line up.
Is the Honeybees on Gingham iPhone 18 Pro Max case MagSafe compatible?
The iPhone 18 Pro Max supports MagSafe, and the MagSafe compatible build (magnet ring for MagSafe accessories) and MagSafe + camera guard build (two-layer MagSafe case with a raised camera surround) of this case have magnets built in, so MagSafe chargers, wallets and mounts hold through it. Card holder is MagSafe compatible too. The other builds offered here have no magnet ring.
Which Honeybees on Gingham case type should I choose for the iPhone 18 Pro Max?
For the iPhone 18 Pro Max you can pick 5 builds. Tough: two-layer case with raised edges. MagSafe compatible: magnet ring for MagSafe accessories. MagSafe + camera guard: two-layer MagSafe case with a raised camera surround. Card holder: slim case with a slot for one card. Slim: lightweight hard shell. Each one carries the same Honeybees on Gingham print.
Is the Honeybees on Gingham phone case a good gift for bee lovers?
Yes. It is covered in painted honeybees on a warm gingham check, so it suits beekeepers, gardeners and bee fans.
What colors are in the Honeybees on Gingham print?
It uses honey gold, caramel, cream and black, with pale gray-blue wings.
You may also like
Ask an AI about us
See what AI says about YOONIG
- ChatGPT (opens in a new tab)
- Claude (opens in a new tab)
- Google AI (opens in a new tab)
- Grok (opens in a new tab)
Opens the assistant with a question about this page already typed.







