Pewter iPhone 16 Plus Case
The Pewter iPhone 16 Plus case is a solid color phone case made for the iPhone 16 Plus, with the camera, button and port openings placed for that model. Choose Tough, MagSafe compatible, Card holder or Slim — the MagSafe builds snap onto magnetic chargers, wallets and mounts. Each one comes in a glossy or matte finish and is printed only when you order it.
Device
Finish: Glossy
Case type: Tough
- Raised camera & screen edges
- Two-layer protection
- Wireless charging
- Made to orderPrinted after you order, usually within 2–7 business days, then 3–7 business days for standard delivery in the US. Checkout shows the dates for your address before you pay.
- Shipping, shown separatelyCarrier options and delivery estimate appear once you enter your address.
- ReturnsRead the returns policy before you order.
Description
Pewter: one plain, even color with no pattern.
Builds offered for the iPhone 16 Plus
- Tough — a printed hard back over a shock-absorbing inner layer, with raised edges around the screen and camera. Supports wireless charging.
- MagSafe compatible — two-layer protection with a built-in magnet ring for MagSafe chargers and accessories.
- Card holder — an impact-resistant polycarbonate case with a slot for one card. MagSafe compatible.
- Slim — a one-piece polycarbonate snap case, slim and lightweight. Supports wireless charging.
- Glossy or matte print finish
- Printed to order for the iPhone 16 Plus
Compatibility
Made for iPhone 16 Plus. Cutouts and dimensions are specific to this model.
Materials & finish
Tough
- Outer shell: 100% polycarbonate, resists daily impacts
- Inner liner: 100% TPU that absorbs shock from impacts
- Dual-layer construction
- Design printed round the edges (3D wrap), UV-protected against outdoor weathering
- Wireless charging compatible (not MagSafe)
- Glossy or matte finish
- Clear, open ports
Print quality
Prints are produced from the original artwork file at full resolution. Colors on screen can vary slightly from the printed result.
Returns
Damaged, defective or misprinted? Contact us within 30 days of delivery for a free replacement or a full refund. Every phone case is printed for your order, so we can’t take it back for a change of mind or a wrong model once it’s printed.
Care
Clean with a soft, damp cotton or microfiber cloth. Avoid using chemicals.
Pewter iPhone 16 Plus Case
$35.00
Pewter
Cool, muted gray with a blue-steel tint, like old tableware metal in soft light. It is medium in depth and a little dusty. Daylight shows its blue side. Indoors it turns plainer and grayer. It pairs with white, navy, cream and black. It also looks good beside blush pink, burgundy or sage green. It feels quiet, cool and steady. It is a neutral with character.
Plain Pewter (Blue Gray) Phone Case, Solid Color, No Print
Pewter is a cool gray with a slight blue tint, like brushed metal. Some people search for it as blue gray. This pewter phone case and pewter iphone case are one even color, with no print or pattern. They also come for Samsung Galaxy and Google Pixel.
It pairs with white, navy and black. Matching products include the pewter airpods case, pewter tumbler and pewter desk mat.
Shop the Pewter design
Made for the iPhone 16 Plus
A case for the iPhone 16 Plus is cut for its body, 160.9 × 77.8 × 7.8 mm, and for its camera layout, so a case made for another model will not line up. To check your model, open Settings › General › About on the phone and tap the part number next to Model Number: it changes to the model number, which starts with A.
The iPhone 16 Plus supports MagSafe. MagSafe compatible has magnets built in, so MagSafe chargers and mounts hold through the case; Tough and Slim have no magnet ring. Card holder is MagSafe compatible.
Related models, each with its own case
- iPhone 16 Pro Max cases · 6.9-inch, Pro camera system
- iPhone 16 Pro cases · 6.3-inch, Pro camera system
- iPhone 16 cases · 6.1-inch, Dual cameras
- Introduced
- September 2024
- Display
- 6.7-inch
- Rear cameras
- Dual cameras: 48MP Fusion, 12MP Ultra Wide
- Size
- 160.9 × 77.8 × 7.8 mm
- Charging
- MagSafe and Qi2
- Port
- USB-C
- MagSafe
- Yes
- Model numbers
- A3082, A3289, A3291, A3290
Sources: support.apple.com, Apple Newsroom
Complete the set
Pewter on other products. Only items compatible with your selection are shown.
- Pewter AirPods CaseFrom$29.00AirPods case · choose your model
- Pewter MagSafe Wallet$35.00MagSafe wallet
- Pewter AirTag CaseFrom$24.00AirTag case · choose your model
- Pewter Apple Watch BandFrom$39.00Apple Watch band · choose your size
Reviews
No reviews yet for our phone cases.
Only customers with a verified order can leave a review.
Questions & answers
Answers come from the YOONIG team. Questions are checked before they appear.
Will the Pewter case fit my iPhone 16 Plus?
Yes. This case is made for the iPhone 16 Plus only, cut for its body and camera layout. It fits model numbers A3082, A3289, A3291, A3290. Cases for other models, even close ones like the iPhone 16 Pro, iPhone 16 or iPhone 16 Pro Max, won’t line up.
Is the Pewter iPhone 16 Plus case MagSafe compatible?
The iPhone 16 Plus supports MagSafe, and the MagSafe compatible build (magnet ring for MagSafe accessories) of this case has magnets built in, so MagSafe chargers, wallets and mounts hold through it. Card holder is MagSafe compatible too. The other builds offered here have no magnet ring.
Which Pewter case type should I choose for the iPhone 16 Plus?
For the iPhone 16 Plus you can pick 4 builds. Tough: two-layer case with raised edges. MagSafe compatible: magnet ring for MagSafe accessories. Card holder: slim case with a slot for one card. Slim: lightweight hard shell. Each one carries the same Pewter color.
Is the Pewter color available on other products?
Yes. The same Pewter color is also made as an AirPods case, a laptop sleeve, a desk mat, a tumbler, an AirTag case, an Apple Watch band, a MagSafe wallet, an iPad case, a mouse pad, a Kindle case and a MacBook case. They are under “Also in Pewter” on this page.
Is Pewter a solid color with no pattern?
Yes. Every pewter design is one even pewter color with no print, no pattern and no graphics.
What color is Pewter?
Pewter is a cool gray with a slight blue tint, like brushed metal. In plain words, think blue gray.
You may also like
Ask an AI about us
See what AI says about YOONIG
- ChatGPT (opens in a new tab)
- Claude (opens in a new tab)
- Google AI (opens in a new tab)
- Grok (opens in a new tab)
Opens the assistant with a question about this page already typed.







