Skip to content
Materials

How printed phone cases are made, and what you can do at home

Printed cases start as blank shells; the artwork goes on by sublimation or UV printing once an order comes in. Plus the limits to respect if you paint your own.

Written by the YOONIG team · Updated · 7 min read

A blank phone case beside a finished printed case with the design wrapped around the edges

A printed case is a blank case plus artwork, joined after you order

A printed phone case is made in two stages. First a blank case is made for one exact phone model. Then the artwork is applied to it, in our range by dye sublimation or UV printing depending on the product, and only after an order comes in. If you want to make your own at home, you're doing the second stage by hand on a blank you've bought, and paint can work if you keep it away from a few parts of the case.

We print cases; we don't paint them. So this page is precise about our own process, and careful about home methods: for those we stick to rules that come from Apple's published guidance for case makers, and we say where we can't vouch for something.

From drawing to a finished case: our four steps

Every YOONIG case goes through the same sequence, which we describe on our about page. Nothing is printed ahead of time and stored.

  • Drawn. Each design starts as an original artwork, prepared as a repeat at full resolution.
  • Placed. The artwork is scaled and positioned for each product and device, so the same print sits correctly on a small phone, a large phone, an earbuds case or a laptop shell.
  • Printed. The case is produced only after you order, by our production partner, on a blank made for the model you chose.
  • Shipped. The finished case is handed to the carrier, with tracking sent by email.

The printing methods the maker names

The maker's specifications name the print method for some products and not for others. Here is what they say, without embellishment. Two methods appear by name: dye sublimation, which the maker calls an image transfer technology, and UV printing, which it describes as surface printing.

We're not going to describe press temperatures, ink chemistry or machines. The maker doesn't publish those details, we haven't stood on the production floor, and a confident paragraph about either would be guesswork.

What the specifications do tell you is what each method is used for. Sublimation is the one credited with printing beyond the flat face, onto side walls and lids. UV printing is credited on the magnetic clear case with vibrant colors that resist cracking.

Print method by YOONIG product, as stated in the maker's specifications
ProductMethod namedWhat the maker says about the print
AirPods case3D full-wrap dye sublimation image transferPrints the front, the side walls and the top lid
AirPods Max caseFull-cover sublimation printOn polycarbonate, gloss or matte finish
Clear phone case3D sublimation printingBright, sharp colors, photo-realistic detail, anti-yellowing protection
Clear MagSafe phone caseUV printing, surface printedVibrant colors that resist cracking; anti-yellowing additives in the case
Tough and Slim phone casesNot namedPrinted round the edges (3D wrap), UV-protected color
MagSafe compatible and MagSafe + camera guardNot namedPrinted round the edges (3D wrap)
Card holder phone caseNot namedPrinted all over the exterior (3D wrap)
Silicone phone caseNoneSolid color, no print

Why the blank matters as much as the print

The print gets the attention, but the blank decides the fit, and it has to exist before any ink does. Each blank is made for one model, with that phone's camera opening, button positions and corner radius. That's why a design can't be moved from one phone to another after printing, and why a case ordered for the wrong model is a problem nobody can fix afterwards. There's more on that in why phone cases only fit one model.

The maker states where the blanks come from. The blanks for Tough, MagSafe compatible, MagSafe + camera guard, Slim, Card holder and AirPods cases are sourced from South Korea. The blanks for Clear and Silicone cases are sourced from China.

The blank also sets the limits of the print. On the hard polycarbonate builds the design is carried round the sides. On a Clear case the artwork sits on a see-through back, so whatever isn't printed shows the phone. Clear plastic brings its own aging question, which we cover in why clear phone cases turn yellow.

Making your own: the rules that apply to any decorated case

If you'd like to decorate a case yourself, whether with paint, markers or stickers, the method is up to you. The limits aren't. Apple's design guidance for case makers lists what a case must not do to the phone, and those rules apply just as much to a case you've painted at the kitchen table (Apple: Accessory Design Guidelines).

Turn them into a checklist before you start:

  • Take the phone out first, and don't put it back until the case is completely dry. Wet paint and solvents don't belong near ports, speakers or lenses.
  • Decorate the outside only. Apple requires that a case not scratch the device through insertion and removal, and anything on the inside surface sits against the phone.
  • Stay away from the camera opening. Apple notes that the color and surface finish of a case near the camera can affect photos, especially with flash, and recommends semi-gloss black around the camera and flash openings.
  • Skip metallic and conductive paints and foils. Apple advises accessory makers to avoid metals and conductive coatings because they absorb radio energy and may degrade cellular, GPS, Wi-Fi, Bluetooth and NFC performance.
  • Make sure the color stays put. Apple's rule is that dyes, inks and coatings must not transfer onto the phone or the user, including when they meet water, hand sanitizer, sunscreen or lotion.
  • Keep buttons, switches, ports, microphones and speaker openings clear and free of buildup.
  • Don't glue magnets or metal plates to it. The guidelines say cases shall not interfere with the compass, autofocus or optical image stabilization.

Painting a case: an honest note on what we can't tell you

People ask which paint to use, and we'd be inventing an answer. We haven't tested paints on cases, and how well a paint bonds depends on the plastic and on the paint. The paint maker's label is the authority: it will say which surfaces the product is meant for and how long it takes to cure. If the label doesn't mention plastic, expect it to chip.

What we can say from knowing the materials is where to set your expectations. A rigid shell gives a coating a stable surface. A flexible case bends every time you fit or remove it, and a hard paint film on a surface that flexes is likely to crack. Soft silicone is the least promising candidate for the same reason. Start with a plain case you can afford to lose, try a small patch on the lower back, and live with it for a week before doing the rest.

Any coating adds thickness, and thick, heavily built-up decoration can get between a phone and a wireless charger. Apple's troubleshooting advice is to try removing a thick case, a metal case or a battery case if wireless charging isn't working (Apple: How to wirelessly charge your iPhone). Keep the middle of the back thin and flat.

Once it's finished, clean it gently. Apple tells owners of its own cases to use a soft, slightly damp, lint-free cloth and to avoid solvents, abrasives and household cleaners (Apple: How to clean your Apple products), and a hand-painted surface is likely to be more fragile than a factory one. If you change your mind about stickers later, see how to remove sticker residue from a phone case.

DIY or printed to order: which suits what

A home project makes sense when the making is the point, when you want a one-off, or when you're customizing a case you already own. For a low-risk way to add something of your own without coating the case at all, our guide to putting a charm on a phone case is a good start.

A printed case makes sense when you want the design carried round the edges, the camera opening left exactly as the blank's maker intended, and a surface that's cleaned with a damp cloth. Our designs are drawn for YOONIG and grouped by style; the art phone cases collection shows the range of what a wrap print can carry.

One practical difference to know before ordering anything made to order: because each case is printed for your order and your model, we can't take it back for a change of mind or a wrong model once it's printed. The details are in our returns policy. Check your model first, then choose the print.

Frequently asked questions

How do you make a custom phone case?

Commercially, artwork is applied to a blank case made for one phone model, by a process such as dye sublimation or UV printing. At home, you decorate the outside of a blank case by hand, keeping clear of the camera opening, buttons and ports.

Can you paint a phone case?

You can paint the outside of a rigid case, with limits: keep paint off the inside and away from the camera opening, avoid metallic or conductive paints, and let it cure fully before the phone goes in. We haven't tested paints, so follow the paint maker's label for plastics.

Can you paint a silicone case?

We wouldn't expect it to last. A soft case flexes whenever it's handled, and a hard paint film on a flexing surface is likely to crack. Check whether the paint's label lists silicone before trying.

What printing method do your cases use?

The maker names dye sublimation for AirPods cases and the Clear phone case, and UV printing for the Clear MagSafe case. For the other printed builds the specification describes a 3D wrap print without naming the method.

Is the design printed after I order?

Yes. Every case is produced only after the order is placed, on a blank made for the exact model you selected.

Does a printed design cover the sides of the case?

On the hard-shell builds, yes: the design is printed round the edges as a wrap. On Clear cases the design sits on a see-through back and the sides are clear TPU.

See the prints made for your exact model

Shop the story

Keep reading