Will an iPhone 8 case fit an iPhone SE? 2nd and 3rd generation
iPhone 8 and the 2020 and 2022 iPhone SE share every published dimension, one rear camera and a Home button. The first SE and the iPhone 7 don't.
Written by the YOONIG team · Updated · 6 min read

iPhone 8 and iPhone SE (2nd and 3rd generation) have the same published size
By Apple's figures, yes: the iPhone SE (2nd generation) and iPhone SE (3rd generation) are both 138.4 × 67.3 × 7.3 mm, exactly the dimensions of the iPhone 8. All three have a 4.7-inch display, a Home button, one 12MP rear camera and a Lightning connector. A case made for the iPhone 8 matches an SE on every measurement Apple puts on its spec sheets.
Two limits on that answer. It doesn't cover the original iPhone SE (1st generation), which is a much smaller phone. And we make our case for the iPhone 8 only: we don't make a case for the iPhone SE, so we haven't cut or checked one against it.
iPhone 7, iPhone 8 and both SE generations in millimeters
The iPhone 8 column is from Apple: iPhone 8 technical specifications. The SE columns are from Apple: iPhone SE (2nd generation) technical specifications and the page for the 2022 model, described below. The iPhone 7 is included because its cases get mixed in with these.
The newest of the four is covered by Apple: iPhone SE (3rd generation) technical specifications, and it's the only one that differs from the iPhone 8 at all: it's 4 g lighter.
| Spec | iPhone 7 | iPhone 8 | iPhone SE (2nd gen) | iPhone SE (3rd gen) |
|---|---|---|---|---|
| Introduced | 2016 | 2017 | 2020 | 2022 |
| Height | 138.3 mm | 138.4 mm | 138.4 mm | 138.4 mm |
| Width | 67.1 mm | 67.3 mm | 67.3 mm | 67.3 mm |
| Depth | 7.1 mm | 7.3 mm | 7.3 mm | 7.3 mm |
| Weight | 138 g | 148 g | 148 g | 144 g |
| Display | 4.7-inch | 4.7-inch | 4.7-inch | 4.7-inch |
| Rear camera | One 12MP | One 12MP Wide | One 12MP Wide | One 12MP Main |
| Home button with Touch ID | Yes | Yes | Yes | Yes |
| Side controls | Volume, Ring/Silent, side button | Volume, Ring/Silent, side button | Volume, Ring/Silent, side button | Volume, Ring/Silent, side button |
| Connector | Lightning | Lightning | Lightning | Lightning |
| Wireless charging | Not listed | Qi | Qi | Qi |
What we make: iPhone 8 cases, and no iPhone SE case
Our iPhone 8 cases come in two builds, Tough and Slim. Tough has two layers, a polycarbonate shell over a TPU liner, with raised edges. Slim is a one-piece polycarbonate shell. Both are wireless charging compatible, and both are printed to order.
We don't list the iPhone SE as a model, and we don't make a case for it. The honest position is this: Apple's numbers give no reason an iPhone 8 case wouldn't go onto a 2020 or 2022 SE, and we can't tell you it's been made or checked for one. If you order an iPhone 8 case for an SE, you're relying on the spec sheets, not on us.
If you'd like to ask before ordering, contact us and say which SE you have.
Which iPhone SE do you have? Three generations, two sizes
'iPhone SE' covers three phones, and only two of them are iPhone 8-sized. Open Settings, tap General, then About, and read the Model Name. If the phone won't start, use the model number. Apple: Identify your iPhone model lists them all.
- iPhone SE (3rd generation), 2022: A2595 in the US, also A2782, A2783, A2784 and A2785. 138.4 × 67.3 × 7.3 mm.
- iPhone SE (2nd generation), 2020: A2275 in the US and Canada, also A2296 and A2298. 138.4 × 67.3 × 7.3 mm.
- iPhone SE (1st generation): A1662 and A1723. 123.8 × 58.6 × 7.6 mm, with a 4-inch display and a 3.5 mm headphone jack. Nothing made for an iPhone 8 fits it.
- iPhone 8, 2017: A1863, A1905 and A1906. 138.4 × 67.3 × 7.3 mm.
What the spec sheets can't settle
Matching height, width and depth mean the case closes around the phone. They don't say where the camera, flash and microphone sit on the back. Apple publishes that in its dimensional drawings for accessory makers, but the list on that page includes the iPhone SE (3rd generation) and not the iPhone 8 or the SE (2nd generation). With only one of the three drawings available, there's nothing official to lay side by side.
What we can say is that the descriptions agree. Apple's identification page describes the iPhone 8 and the 2020 SE in the same terms: a 4.7-inch display, a solid-state Home button with Touch ID, a flash on the back and a SIM tray on the right side. The spec sheets list the same controls for all three.
If you already have an iPhone 8 case and an SE, the check takes a minute. Look for an even gap around the camera and flash, a case that lies flat with no rocking, buttons that click without being held down, and a Lightning plug that goes fully in.
iPhone 7: a fraction smaller, and no wireless charging
The iPhone 7 is the one that looks the same and isn't. It's 0.1 mm shorter, 0.2 mm narrower and 0.2 mm thinner than the iPhone 8. In a rigid case made for the 8, a 7 has that much room to move, most noticeably in depth, where the case edge is sized for a thicker phone.
Its spec sheet also lists charging by cable only, where the iPhone 8 and both later SEs list wireless charging with Qi chargers. So a wireless charging compatible case matters on an 8 or an SE and makes no difference on a 7. We don't make a case for the iPhone 7.
None of these phones has MagSafe. The magnet array arrives with the iPhone 12 line, which our guide to which phones have MagSafe lists in full.
Moving on from an SE or an 8
Nothing from this family carries over to a newer iPhone. The iPhone 16e and 17e, for example, are 146.7 × 71.5 × 7.8 mm with a 6.1-inch display and a USB-C connector: 8.3 mm taller and 4.2 mm wider than an SE. Cases, Lightning cables and screen protectors all stay behind.
We make iPhone 16e cases in Tough and Clear builds. Our iPhone 17e cases come in the same two. Those two phones share their dimensions with each other, which raises its own question, covered in will an iPhone 16 case fit an iPhone 16e.
For the whole lineup in one table, see iPhone sizes compared. And if you're unsure of your model on any brand, start with our guide to finding your exact model.
Frequently asked questions
What cases fit the iPhone SE?
For the 2020 and 2022 iPhone SE, cases sold for the iPhone SE (2nd or 3rd generation). Apple lists both at 138.4 × 67.3 × 7.3 mm, the same as the iPhone 8, which is why iPhone 8 cases are often used on them. We make an iPhone 8 case and don't make one for the SE.
Is the iPhone SE the same size as the iPhone 8?
The 2nd generation (2020) and 3rd generation (2022) are: all three measure 138.4 × 67.3 × 7.3 mm. The 1st generation SE is 123.8 × 58.6 × 7.6 mm, much smaller.
Will an iPhone 7 case fit an iPhone SE?
Not exactly. The iPhone 7 is 138.3 × 67.1 × 7.1 mm, so a case molded for it is 0.1 mm short, 0.2 mm narrow and 0.2 mm shallow for a 2020 or 2022 SE. A rigid case made for the 7 will be tight.
Do the iPhone SE 2nd and 3rd generation use the same case?
By Apple's spec sheets they're the same size, 138.4 × 67.3 × 7.3 mm, with the same controls and one rear camera. The 3rd generation is 4 g lighter. We don't make a case for either, so we haven't checked one against the other.
Does the iPhone SE have MagSafe?
No. Apple's spec sheets for the 2nd and 3rd generation SE list wireless charging with Qi chargers and no MagSafe magnets.
Will an iPhone 8 Plus case fit an iPhone SE?
No. The iPhone 8 Plus is 158.4 × 78.1 × 7.5 mm, about 20 mm taller and 10.8 mm wider than an SE.
Shop the story
- Pearl White Phone caseFrom$29.00Phone case · choose your model
- Red Poppies Phone caseFrom$35.00Phone case · choose your model
- Denim Blue Phone caseFrom$29.00Phone case · choose your model






