Do screen protectors work? What they protect and what they don't
A protector is a replaceable layer that takes scratches for the display. What it is made of, what phone makers say, the trade-offs, and where not to fit one.
Written by the YOONIG team · Updated · 7 min read

Yes for scratches, with limits nobody publishes
A screen protector works in one plain sense: it is a replaceable layer on top of the display, so the scratches from keys, sand and grit land on the protector and not on the screen. When it is scratched or cracked you peel it off and the glass underneath is as it was. What it does in a drop is far less clear, because no phone maker publishes test results for protectors, and we have none of our own to offer.
So the honest answer has two halves. For scratches, a protector does what it claims, at the cost of an extra layer over your touchscreen and sensors. For breakage, treat any promise with caution and look at how the whole phone is protected.
What screen protectors are made of
There are two families, and the phone makers' own support pages use the same two words for them: plastic film and tempered glass. Samsung, for example, describes the factory-fitted layer on some Galaxy phones as a pre-installed plastic screen protector, and its touch troubleshooting refers to a screen protector or tempered glass.
Film protectors are thin, flexible sheets of clear plastic with an adhesive backing. The packaging normally names the plastic, most often PET or TPU. Samsung sells one for the Galaxy S25 line as an Anti-Reflecting Film, described as designed to safeguard the display while minimizing glare (Samsung: Galaxy S25 accessories).
Tempered glass protectors are rigid sheets of heat-treated glass with an adhesive layer underneath and, usually, an oil-repellent coating on top. They feel like the screen itself, which is why most people prefer them, and they crack rather than dent when they take a hard knock.
Either kind may add a function: a matte anti-glare finish, a privacy filter that darkens the screen from the side, or a blue-light tint. Those are choices about how the screen looks, not about protection.
| Feature | Plastic film | Tempered glass |
|---|---|---|
| What it is | Thin flexible plastic sheet with adhesive | Rigid sheet of heat-treated glass with adhesive |
| Feel | Slightly soft; a fingernail can leave a dent | Hard and smooth, close to the bare screen |
| How it fails | Scratches and scuffs build up over time | Chips at an edge or cracks across, then needs replacing |
| Fitting | Needs careful squeegeeing to clear air | Drops on in one piece; dust under it is the main risk |
| Typical extras | Anti-glare or anti-reflective finish | Oil-repellent coating, privacy filter |
What phone makers say about their own glass
The makers put a lot of work into the front glass, and they say so. Apple describes the Ceramic Shield 2 front of the iPhone 17 as having 3x better scratch resistance, a comparison it footnotes as against the previous-generation iPhone (Apple: iPhone 17). Better is not the same as immune, and Apple does not claim it is.
Its own safety guidance for iPhone points the other way: if you are concerned about scratching the surface of iPhone, consider using a case or cover (Apple: Important safety information for iPhone). That is the maker telling you scratches are possible and that covering the surface is a reasonable response.
There is a second thing a protector takes for the screen. iPhone displays have a fingerprint-resistant, oil-repellent coating, and Apple says it wears over time with normal use and that cleaning products and abrasive materials diminish it further. With a protector on, the wear happens to the protector's coating. You can replace that; you cannot easily replace the one on the phone.
None of the three big makers publishes a recommendation for or against third-party protectors on ordinary slab phones. What they publish is guidance on the side effects, which is where the real decision lies.
What a protector cannot do
It covers the flat front and nothing else. The frame, the corners, the back glass and the camera lenses are all outside it, and corners are where a dropped phone tends to land. A protector does nothing for a phone that hits the pavement on its edge.
It is thin. A sheet a fraction of the thickness of the phone cannot absorb much, and nobody publishes numbers for how much. We do not publish drop ratings for our cases either, so we will not pretend to have them for a product we don't sell.
For impact, the parts that matter are around the screen rather than on it: a case that wraps the corners and stands a little proud of the glass, so the display does not meet a flat surface first. Our two-layer Tough phone cases have a polycarbonate shell over a TPU liner with raised edges around the screen and camera. What those features do and don't do is set out in what makes a phone case protective.
The lenses on the back are a separate question with a separate answer, covered in do you need a camera lens protector.
The costs: touch, fingerprint and face unlock
A protector sits between you and several sensors. Each maker documents what can go wrong.
- Touch. Samsung says screen protectors may affect touch sensitivity and gesture recognition, especially around the screen edges with non-genuine ones, and offers a Touch sensitivity setting under Settings, then Display, for use with a protector or tempered glass.
- Fingerprint under the display. Google says screen protectors can interfere with the Pixel fingerprint sensor, recommends Made for Google certified ones, and adds that even with those you may notice worse performance until the sensor recalibrates over the first hours or days.
- Fingerprint on Galaxy. Samsung says installing another screen protector may affect fingerprint recognition, and that you may need to remove and re-add your fingerprints.
- Face ID. Apple's troubleshooting says to remove anything covering the TrueDepth camera, such as a smudge, case or screen protector. On iPhone 18 Pro models that camera sits at the top toward the left corner, so an older cut-out pattern may not suit it.
- Fit with a case. A protector that reaches the border of the glass and a case rim that overlaps the same border will fight, and the protector lifts. That pairing is covered in using a phone case with a screen protector.
Phones where you should not add one
Folding inner displays are the exception to everything above. Samsung tells owners of its foldables not to attach any adhesive accessories, such as protectors or stickers, to the main screen, and not to remove the protective layer that is already there (Samsung: Care for your Samsung foldable phone). Apple says the inner display of iPhone Duo has a nano-texture cover layer that is an integral part of the display, and that applying an external screen protector can compromise the display performance. Google says not to pick at or remove the protective film on a Pixel Fold.
On those phones the maker has already fitted the protective layer and tuned the screen for it. Leave it alone and use the service channel if it lifts.
Who should use one, and who can skip it
You can decide this from how the phone lives, not from a spec sheet.
- Use one if the phone shares a pocket or bag with keys, coins or tools, or goes to the beach or a building site. Sand and grit are what mark glass.
- Use one if you plan to sell or trade in the phone and want the display unmarked. A scratched protector peels off; a scratched screen stays scratched.
- Use one if the oil-repellent coating matters to you and you clean the screen often.
- Skip it if the phone lives alone in a pocket, you dislike the feel, or it interferes with your fingerprint sensor after re-enrolling.
- Do not use one on a folding inner display.
If you decide to fit one
Buy for your exact model, fit it with the case off and the screen properly clean, and then check the unlock and touch settings for your brand. The whole routine is in how to apply a screen protector.
If the screen is already marked and you were hoping a protector would hide it, read removing scratches from a phone screen first; adhesive can fill a faint hairline, and it does nothing for a deep one. When the protector itself has done its job and cracked, how to remove a screen protector covers getting it off without spreading glass.
Frequently asked questions
What are screen protectors made of?
Either plastic film, a thin flexible sheet usually labeled PET or TPU, or tempered glass, a rigid heat-treated sheet. Both have an adhesive layer underneath, and glass ones usually add an oil-repellent coating.
Do screen protectors actually prevent cracks?
There is no published maker data to say how much. A protector is thin and covers only the flat front, so for drops a case with raised edges and covered corners matters more.
Is a glass or a film screen protector better?
Glass feels closer to the bare screen and resists everyday scratches well but cracks when hit hard. Film is thinner and flexible but marks more easily. Either works as a replaceable scratch layer.
Do I need a screen protector if my phone has Ceramic Shield?
It is optional. Apple says Ceramic Shield 2 has 3x better scratch resistance than the previous generation, and also advises a case or cover if you are concerned about scratching the surface.
Do screen protectors affect touch or fingerprint unlock?
They can. Samsung and Google both document reduced touch or fingerprint performance with some protectors and provide settings and re-enrollment steps to compensate.
Should I put a screen protector on a folding phone?
Not on the inner display. Samsung, Apple and Google each say to leave the factory layer in place and not to add or remove films on the folding screen.
Shop the story
- Black Bubble Pattern Phone CaseFrom$29.00Phone case · choose your model
- Santorini Phone CaseFrom$29.00Phone case · choose your model
- Midnight Blue Phone CaseFrom$29.00Phone case · choose your model






