Skip to content
AirPods

How to reset AirPods, AirPods Pro and AirPods Max (every model)

Apple's reset steps for every AirPods model, the lighter fixes to try first, and what to do when the status light never flashes white.

Written by the YOONIG team · Updated · 7 min read

A hand holding an open AirPods case with a thumb on the setup button on the back

The reset in one line, for each kind of AirPods

To reset AirPods, put them in the charging case, close the lid for 30 seconds, forget them in your iPhone's Bluetooth settings, then open the lid and hold the setup button on the back of the case for about 15 seconds until the light flashes amber, then white. AirPods 4, AirPods 5 and AirPods Pro 3 have no button: you double-tap the front of the case three times instead. AirPods Max use two buttons on the right ear cup.

Those three methods come straight from Apple (Apple: How to reset your AirPods and AirPods Pro). The exact sequences are below, along with the two lighter fixes Apple tells you to try before a reset, and what to do when the light refuses to turn white. If you don't know which generation you own, check which AirPods you have first, because the button and no-button models look alike from the front.

Restart, forget or reset: pick the smallest fix that works

Apple treats a factory reset as the last of three steps. Its guide says to make sure the device your AirPods are paired with is up to date, then restart, then unpair, and to reset only if the AirPods still aren't working as expected (Apple: Restart, unpair, or reset your AirPods). A restart costs you ten seconds. A reset means setting the AirPods up again.

Three levels of fix, as Apple describes them
What you doHowWhat it costs you
Restart AirPods or AirPods ProPut them in the case and close the lid for at least 10 secondsNothing: they reconnect as before
Restart AirPods MaxHold the Digital Crown and the listening mode button until the light next to the charging port flashes amber (about 10 seconds), then release right awayNothing, if you let go in time
Unpair (forget)On iPhone or iPad: Settings, tap the AirPods' name near the top, then Forget This DeviceThey're removed from every device on the same Apple Account and must be paired again
Factory resetCase button for 15 seconds, the triple double-tap, or the two AirPods Max buttons for 15 secondsBack to factory settings; you set them up again from scratch

Reset AirPods 1, 2 and 3 and AirPods Pro 1 and 2 (setup button on the back)

These are the models with a setup button on the back of the case. Have the iPhone or iPad they're paired with nearby.

  • Put both AirPods in the charging case and close the lid. Wait 30 seconds.
  • On the iPhone or iPad, go to Settings, tap Bluetooth, and look for the AirPods under My Devices. Tap the More Info button next to them, tap Forget This Device, and confirm. If they aren't listed, skip this step.
  • Open the lid of the charging case.
  • Press and hold the setup button on the back of the case for about 15 seconds.
  • Keep holding until the status light flashes amber, then white. Then let go.
  • With the lid still open, hold the case next to the iPhone or iPad and follow the steps on screen to reconnect.

Reset AirPods 4, AirPods 5 and AirPods Pro 3 (no button: double-tap the case)

Apple removed the setup button on these cases and replaced it with a double-tap on the front of the case. Apple's guide describes the reset as double-tapping the front of the case three times; the timing of each double-tap follows the light.

  • Put both AirPods in the charging case and close the lid. Wait 30 seconds.
  • Forget the AirPods on the iPhone or iPad: Settings, Bluetooth, the More Info button next to the AirPods, Forget This Device.
  • Open the lid.
  • While the status light is on, double-tap the front of the case.
  • When the light flashes white, double-tap again.
  • When the light flashes faster, double-tap a third time.
  • Wait for the light to flash amber, then white. Reconnect by holding the open case near your device and following the steps on screen.

Reset AirPods Max

AirPods Max have no charging case to press, so everything happens on the right ear cup. Apple asks you to charge them to at least 50 percent before a restart or a reset, with one exception: if they won't charge at all, go straight to the reset (Apple: How to reset your AirPods Max).

Press and hold the listening mode button and the Digital Crown together for 15 seconds, until the LED flashes amber, then white. The LED is the small light next to the charging port. Timing matters here, because the restart and the reset use the same two controls: release them at the first amber flash, at about 10 seconds, and you've only restarted the headphones; keep holding and they go back to factory settings.

Afterward, pair them again with your iPhone, iPad, Mac or other device as if they were new.

There's no separate reset for the charging case

People search for how to reset the case on its own. There isn't such a procedure in Apple's documentation: the reset for AirPods and AirPods Pro is carried out on the case, with both earbuds inside, and it resets the set as a whole. If your case is misbehaving, start with power, not pairing.

A case that shows no light, or won't take a charge, needs a different checklist that starts with the cable, the charger and the port. That's in what to check when an AirPods case won't charge. A case that came as a replacement, or a single replacement earbud, has its own pairing routine that starts with 20 minutes on a charger, covered in pairing a replacement AirPod.

One detail for the oldest cases: on the Lightning Charging Case for AirPods 1 and 2, the status light is inside, between the two AirPods, not on the front. Open the lid and watch there for the amber-then-white signal. The meaning of every color is in our guide to AirPods case light colors.

If the light never flashes white

Apple's own fallback is short. Run it once before assuming anything is broken.

  • Put the AirPods in the case and close the lid for 20 seconds.
  • Open the lid.
  • Repeat the reset for your model: hold the setup button for about 15 seconds, or run the three double-taps again, until the light flashes amber, then white.
  • No light at any point: the case is out of charge. Plug it in with the AirPods inside and try again after it has had time on power.
  • Double-taps not registering on AirPods 4, AirPods 5 or AirPods Pro 3: make sure the lid is open and the light is on before the first tap. If the case is in a cover, slip the cover off and tap the bare case.
  • Button reset stops at amber: you probably let go early. Hold through the amber flashes until the light turns white.

What a reset does and doesn't fix

A reset returns the AirPods to factory settings and clears the pairing, which is why Apple points to it for stubborn connection trouble, for one earbud that stays silent after its other checks, and for a firmware update that won't go through. After it, you connect them as you did on day one: Home Screen, open the case next to the iPhone, tap Connect.

It doesn't transfer ownership. Apple says AirPods can be linked to one Apple Account, and if someone else has used them, that person must first remove them from their account. Secondhand AirPods that still belong to a previous owner's account need that owner's help, not another reset.

It also doesn't repair hardware. A worn battery stays worn; if short listening time is the complaint, why AirPods die so fast is the better place to look. And on Android the button or double-tap part works the same, since it happens entirely on the case, as explained in using AirPods with Android. A printed AirPods case from us leaves the reset unchanged too: it's a shell around Apple's case, nothing more.

Frequently asked questions

How do I reset my AirPods Pro?

For AirPods Pro 1 and 2: case closed for 30 seconds, forget them in Settings, Bluetooth, then open the lid and hold the setup button on the back for about 15 seconds until the light flashes amber, then white. AirPods Pro 3 have no button: double-tap the front of the case three times, following the light.

How do I reset AirPods without the phone they were paired with?

Apple's steps say to skip the Forget This Device step if the AirPods don't appear in your Bluetooth settings. The rest of the reset happens on the case: lid open, button for about 15 seconds or the three double-taps, until the light flashes amber, then white.

How long do you hold the button to reset AirPods?

About 15 seconds, with the lid open, until the status light flashes amber and then white. Holding it for only about 5 seconds starts pairing mode (a flashing white light) without resetting anything.

How do I reset AirPods Max?

Charge them to at least 50 percent, then hold the listening mode button and the Digital Crown for 15 seconds until the LED flashes amber, then white. Letting go at the first amber flash only restarts them.

Will resetting AirPods remove them from the previous owner's Apple Account?

Apple says that if someone else has used the AirPods, that person must first remove them from their Apple Account. A reset on its own isn't described as doing that.

Why won't my AirPods reset?

The usual causes are a flat case (no light at all), releasing the button before the light turns white, or tapping the wrong spot on a no-button case. Close the lid for 20 seconds, open it and repeat the steps for your model.

Find the cover made for your AirPods

Shop the story

Keep reading