Skip to content
Buying guide

Best iPhone 15 Pro Max case: choosing for size, grip and MagSafe

The 15 Pro Max is a big phone, so the right case is about bulk, grip and what you stick on the back. How to choose, and the fit mistakes to avoid.

Written by the YOONIG team · Updated · 6 min read

A hand holding a large iPhone in a printed case with a magnetic card wallet attached to the back

On a phone this size, the best case is the one you'll keep on

For the iPhone 15 Pro Max, the best case is the lightest one that still has raised edges around the camera and screen, with built-in magnets if you use MagSafe. On a 6.7-inch phone that weighs 221 grams, every extra millimeter of case is something you feel in your hand and your pocket, so bulk is a bigger part of the decision than on a smaller iPhone.

That means the questions are a little different from a normal case guide. How do you hold it: one hand or two? Where does it live: pocket, bag, car mount? And what goes on the back: a wallet, a grip, a stand, nothing at all? Answer those and the type of case follows. The rest of this page is about how.

The 15 Pro Max in numbers, next to the phones people compare it with

Apple's titanium frame is the reason the 15 Pro Max is lighter than the 14 Pro Max it replaced: 221 g against 240 g, per Apple's spec pages for the iPhone 15 Pro Max and the iPhone 14 Pro Max. At launch Apple called the 15 Pro models its lightest Pro models yet (Apple Newsroom). Nineteen grams is noticeable, but it's still 34 g heavier than the 15 Pro, and a case adds to it.

The Max also has the larger camera module of the two 15 Pro models, because it carries the 5x Telephoto with Apple's tetraprism design (120 mm, f/2.8). The 15 Pro has a 3x Telephoto instead. A camera opening and lip cut for one won't line up with the other.

iPhone 15 Pro Max compared with the 15 Pro and 14 Pro Max, from Apple's spec pages
SpeciPhone 15 ProiPhone 15 Pro MaxiPhone 14 Pro Max
Height × width × depth146.6 × 70.6 × 8.25 mm159.9 × 76.7 × 8.25 mm160.7 × 77.6 × 7.85 mm
Weight187 g221 g240 g
FrameTitaniumTitaniumStainless steel
Telephoto3x5x3x
Left sideAction buttonAction buttonRing/silent switch
PortUSB-CUSB-CLightning

Bulk, grip and one-handed reach

A case can't make a 76.7 mm wide phone narrower, but it can make it easier or harder to hold. Three things decide that. First, the type: a single-shell slim case keeps the phone closest to its own width, while two-layer and rugged cases add a little on every side. On a smaller phone that barely registers; on the Max it's the difference between a comfortable stretch to the top corner and a two-handed phone.

Second, the finish. The same case print usually comes glossy or matte, and the two feel different in the hand, which matters more on a big phone you hold by the edges for long stretches. Neither finish is more protective. Our matte vs glossy guide compares them properly.

Third, what's on the back. A ring or a pop-out grip changes one-handed use more than any case can. If you're planning one, decide before you buy the case: some grips are magnetic and need magnets in the case, others stick on with adhesive and need a smooth flat back. Where to place it so the phone balances is covered in where to put a phone grip on your case.

Planning a MagSafe setup around the Max

A phone this size is one you'll often want on a stand or a car mount rather than in your hand. Apple lists MagSafe wireless charging up to 15W, Qi2 up to 15W and Qi up to 7.5W for this model. None of the magnetic accessories hold properly through a case without magnets, so this choice comes first. Here's how each accessory changes what you need from the case.

On the card point, Apple says not to put credit cards, security badges, passports or key fobs between the iPhone and a MagSafe charger, and to remove them from a case that holds them before charging (Apple: How to use your MagSafe Charger). If you're torn between a wallet and a card slot, MagSafe wallet vs card holder case sets them side by side.

  • Snap-on charger or battery pack: a case with built-in magnets keeps it aligned with the phone's charging coil.
  • Magnetic wallet: needs magnets in the case. A heavier wallet on a heavier phone shifts more easily when you pull it from a pocket, so look for a flat, smooth back.
  • Stand or desk mount: magnets in the case, and check the stand is rated for a phone of this weight with a case on.
  • Car mount: magnets in the case, or a clamp mount that grips the sides. Clamp mounts need to open wide enough for the Max in its case.
  • Card holder case instead of a wallet: fine, but take the card out before you put the phone on a MagSafe charger.

Match the case type to how the phone travels

The table below starts from your habits, not from a product list. It describes construction only: we don't publish drop-test ratings, and you should be wary of any listing that promises a phone will survive a fall.

iPhone 15 Pro Max case types by carry style
How you carry itCase type to look forWatch for
Front pocket, all daySlim shell or slim card holderLittle extra edge around the camera on very thin cases
Back pocket or loose in a jacketTwo-layer with raised edgesAdded width; check it still fits the pocket
Bag or purse, rarely handledSlim or clearKeys and coins scratch a soft finish
Car mount and desk standTwo-layer with built-in magnetsMount must clear the case's camera lip
Wallet left at homeCard holder or magnetic walletCards near a MagSafe charger
Showing the titanium colorClear, or clear with magnetsClear plastic yellowing over time

What we make for the 15 Pro Max

For the iPhone 15 Pro Max we print six builds to order, each cut for this model. MagSafe compatible is two layers, a polycarbonate shell over a TPU liner, with a magnetic module built in; it's the one for chargers, stands and wallets, and it sits in our MagSafe phone cases with Clear MagSafe and the Card holder. Tough is the same two-layer construction with raised edges and no magnets; it charges on ordinary wireless pads.

Slim is one polycarbonate shell with no magnets, the build that adds the least to an already large phone. Clear pairs a clear polycarbonate back with soft TPU sides, and Clear MagSafe adds built-in magnets. The Card holder is a slim polycarbonate case with a slot for one card, and the maker lists it as MagSafe compatible. Our MagSafe + camera guard build and our silicone case aren't made for the 15 Pro Max.

Mistakes that are easy to make with a Max

Grabbing a 14 Pro Max case because it looks the same size. It isn't: the 14 Pro Max is taller, wider and thinner, has a ring/silent switch where the 15 has the Action button, and a Lightning port. The numbers are in will a 14 Pro Max case fit a 15 Pro Max. The same goes for moving up: the 16 Pro Max is 163.0 mm tall, so a 15 Pro Max case on a 16 Pro Max is its own question.

Buying a case for the 15 Pro by accident. Listings often group the two, and the 15 Pro case is 13.3 mm shorter with a smaller camera opening. Check the model number in the listing, and on your phone if you're unsure.

Choosing a case on looks and then adding magnetic accessories later. Stick-on metal rings exist, but they add a layer and you have to line them up yourself. Decide on MagSafe on day one; what is MagSafe explains what the system covers.

Frequently asked questions

What's a good protective case for the iPhone 15 Pro Max?

Look for a two-layer build, a rigid outer shell over a softer liner, with raised edges around the camera and the screen. We don't publish drop-test results, so compare how cases are built rather than trusting a rating printed on the box.

How heavy is the iPhone 15 Pro Max without a case?

Apple lists it at 221 grams (7.81 ounces), against 240 grams for the iPhone 14 Pro Max and 187 grams for the iPhone 15 Pro.

Do I need a MagSafe case for a MagSafe wallet on the 15 Pro Max?

Yes. The wallet's magnets need magnets in the case to hold through it; without them it slides off or won't attach.

Does a 15 Pro case fit the 15 Pro Max?

No. The 15 Pro is 146.6 × 70.6 mm and the 15 Pro Max is 159.9 × 76.7 mm, and the Max has a larger camera module for its 5x Telephoto.

Which case type adds the least size to the 15 Pro Max?

A one-piece slim shell. It keeps the phone closest to its own size, at the cost of the softer inner layer a two-layer case has.

Find a case cut for your exact iPhone model

Shop the story

Cases for the models in this guide

Keep reading