Skip to content
AirPods

How to check AirPods battery, including the case

Where to read the charge of each AirPod and of the case: iPhone, iPad, Mac, the status light, low-battery alerts, and what you can and can't see on Android.

Written by the YOONIG team · Updated · 8 min read

A hand holding an open AirPods case beside an iPhone that shows the battery level

The fastest check: Settings on your iPhone, or the light on the case

To check AirPods battery on an iPhone or iPad, open the case lid with the AirPods inside, go to Settings, tap Bluetooth, then tap the Info button next to your AirPods. For the case alone, with no phone, take the AirPods out and look at the status light: green means the case is fully charged, amber means it has less than one full charge left.

Those two cover most situations. The rest of this page is the detail: every other place the level shows up, which battery each one is reporting, and what to do when the reading you want isn't there.

Which check shows which battery

AirPods have three batteries, one in each earbud and one in the case, and no single check shows all three in every situation.

Where each AirPods battery level can be read
Where you lookEarbudsCaseWhat you need
iPhone or iPad SettingsYes, as a percentageSee the note below the tableAirPods connected, or the lid open nearby
Batteries widget on iPhone or iPadYesNot stated by AppleA widget added to the Home Screen
Mac: Control Center or Bluetooth menuYes, as a percentageNot stated by AppleAirPods near the Mac, lid open
Status light, AirPods in the case, lid openYes: green or amberNoNothing else
Status light, AirPods out of the caseNoYes: green or amberNothing else
Low-battery notifications and tonesYes, at 20, 10 and 5 percentNoAn iPhone or iPad for the notifications

On an iPhone or iPad

Apple documents two routes through Settings, and they end in the same place. Its charging article starts from the case; its user guide starts with the AirPods in your ears (Apple: Charge your AirPods).

For the widget, Apple's AirPods guide says you can add a widget to check the battery level of your devices, including your AirPods, and sends you to the iPhone User Guide for the steps: touch and hold the Home Screen background until the apps jiggle, add a widget from the top of the screen, and choose Batteries. Apple notes that the size options show different information.

About the case's own percentage. Apple's current pages don't spell out when the phone shows it. The setup Apple's own steps use is the one to copy: at least one AirPod in the case, the lid open, the case held next to the phone. If a case reading doesn't appear, don't hunt through menus for it. Take the AirPods out and read the light instead.

  • From the case: open the lid with your AirPods inside and hold the case close to the iPhone or iPad.
  • Go to Settings and tap Bluetooth.
  • Tap the Info button next to your AirPods to see the charge.
  • While wearing them: open Settings and tap the name of your AirPods near the top of the screen to see the battery percentage.
  • At a glance: open the case next to your iPhone. Apple's troubleshooting steps use this to confirm that each AirPod is charging, and its illustration shows the battery level on the Home Screen.

On a Mac

Open the lid, or take the AirPods out of the case, and hold them close to the Mac. Open Control Center, click Sound, then choose your AirPods from the list.

There's a second route in Apple's user guide: click the Bluetooth status menu in the menu bar to see the battery percentage of your AirPods. If the Bluetooth icon isn't in your menu bar, turn it on in System Settings under Menu Bar (Apple: Charge AirPods, AirPods Pro, or AirPods Max).

The AirPods need to be close to the Mac for either to work. If they don't appear, open the case lid next to the computer and try again.

With no screen: reading the case light

The light is the only check that works anywhere, with any phone or none, and it's the one Apple documents for the case battery. The rule is about where the AirPods are. In the case with the lid open, the light reports the AirPods. Out of the case, it reports the case.

Green means fully charged. Amber means less than one full charge remains, which for the case means it can't refill the AirPods completely one more time. No light at all means it needs charging before you can use them again.

Newer models add a finer signal. On AirPods 4, AirPods Pro 2 and AirPods Pro 3 with current firmware, the light briefly pulses amber when the AirPods or the case are under 95%, and flashes amber when the AirPods are under 95% and the case is under 25%. A flashing amber case is the one to plug in soon. The light sits on the front of the case on most models and inside the case on the Lightning Charging Case for AirPods 1 and 2; the full decoder is in AirPods case light colors.

If you use a cover, check that you can still see the light through or around it. Our printed AirPods cases are polycarbonate hard shells made for one AirPods model each, so the cover for AirPods Pro 3 is not the cover for any other generation.

Alerts that check for you

You don't have to look at all if you let the AirPods report in. Apple says you get a notification on your iPhone or iPad when the charge is at 20, 10 and 5 percent remaining. The AirPods also play a tone: once when the battery is at 10 percent, and a second time right before they turn off.

On AirPods Pro 2, AirPods Pro 3 and AirPods 4 with Active Noise Cancellation there's a newer option called Charging Notifications. It reminds you to charge when the battery is low and tells you when charging is complete. Go to Settings, tap the name of your AirPods, tap Battery, then turn on Charging Notifications. Apple lists two requirements: the latest AirPods firmware and iOS or iPadOS 26 or later.

That second notice answers a common question, how you know when earbuds are done charging, without opening anything. The other ways to confirm a charge in progress are in how to tell if AirPods are charging.

On Android, and with other wireless earbuds

Apple's guide to using AirPods with a non-Apple device covers pairing and calls and doesn't mention battery level, so there's no Apple-documented reading on Android. What Android offers is its own battery widget: Google says it's available on Android 12 and later and works with devices that report battery info using Bluetooth or Google Fast Pair. Touch and hold an empty space on a Home screen, tap Widgets, then tap Battery (Google: Check battery level on your Pixel phone). Neither company states that AirPods or their case will show up there, so the case light remains the dependable check. More on the pairing side is in do AirPods work with Android.

For wireless earbuds from other makers the pattern is usually the same two things, a light on the case and a reading in the phone's Bluetooth settings or the maker's app, but the colors and their meanings are specific to each brand. Use the maker's own guide for those; don't assume amber and green mean what they mean on AirPods.

AirPods Max have no charging case to check. Take them out of the Smart Case, hold them near your iPhone and use the same Bluetooth Info screen, or press the listening mode button and read the status light on the headphones: on the first model, off the charger, green means 15% or more and amber means less (Apple: Charge your AirPods Max).

When the reading looks wrong

One AirPod far below the other after a night in the case can mean that earbud didn't charge. Apple's check for this is short: put both AirPods in the case, let them charge for 30 seconds, open the case near your iPhone and confirm that each one shows as charging (Apple: If your left or right AirPod isn't working). The same page says to make sure the case itself is charged and its charging port is clean; how to clean AirPods and the charging case covers doing that safely.

A level that sits below 100% on the charger is normally a setting, not a fault. Optimized Battery Charging and, on AirPods Pro 3, Optimized Charge Limit both hold the charge back on purpose; they're under Settings, your AirPods' name, Battery.

And if the numbers are right but drop faster than they should, the question has changed from checking to draining. That's covered in why AirPods die so fast.

Frequently asked questions

How do I check my AirPods case battery without the AirPods?

Look at the status light with the AirPods out of the case. Green means the case is fully charged; amber means less than one full charge remains. Apple documents no on-screen reading for an empty case.

How do I see AirPods battery percentage on my iPhone?

Open the case lid with the AirPods inside, go to Settings, tap Bluetooth, then tap the Info button next to your AirPods. While you're wearing them, tapping the AirPods' name at the top of Settings shows it too.

How do I know when my wireless earbuds are fully charged?

On AirPods, open the lid with the earbuds inside: a green light means they're full. Supported models can also send a notification when charging is complete. Other brands use their own light codes, so check the maker's guide.

Can I check AirPods battery on Android?

Apple doesn't document a way. Android 12 and later has a battery widget for devices that report battery info over Bluetooth or Fast Pair, but neither Apple nor Google states that AirPods appear in it. The case light always works.

What do the low-battery sounds on AirPods mean?

Apple says the AirPods play a tone once when the battery is at 10 percent and a second time right before they turn off.

Find the cover made for your AirPods

Shop the story

Keep reading