Skip to content
AirPods

How to tell if your AirPods and case are charging

A dark status light doesn't mean your AirPods stopped charging. Five ways to confirm a charge: the light, a tap, your iPhone, your Mac, and what Android can show.

Written by the YOONIG team · Updated · 7 min read

An AirPods case resting on a wireless charger with a small amber light on the front

The light only stays on for a few seconds, and that's normal

To tell if AirPods are charging, look at the status light right after you connect power: it comes on for several seconds, amber if the battery isn't full yet and green if it is, then switches off while charging carries on. For a firm answer, open the case next to your iPhone and read the charge there.

The dark light is what worries most people, so it's worth being exact. Apple says that on a wireless charger the light shows the current charge level for 8 seconds, and its user guide adds that the light turns on for several seconds, then turns off while the case continues to charge (Apple: Charge AirPods, AirPods Pro, or AirPods Max). The orange light is not supposed to stay on for the whole charge. A case sitting dark on the charger is doing what it was designed to do.

Five ways to confirm a charge, and which models each one works on

Pick the check that fits what you have in your hand. The first two need nothing but the case.

Ways to confirm that AirPods or the case are charging
CheckWhat you'll see or hearWorks with
Status light when you connect powerAmber or green for several seconds, then offEvery charging case
Tap the case on a wireless chargerThe light comes back: amber while charging, green when fullAirPods 3, AirPods 4 with Active Noise Cancellation, AirPods Pro 1, 2 and 3
Case soundA sound when the case begins to chargeAirPods 4 with Active Noise Cancellation, AirPods Pro 2 and 3, unless you turned it off
iPhone or iPadBattery level for the AirPods in Bluetooth settingsEvery model
MacBattery percentage in Control Center or the Bluetooth menuEvery model

Reading the light: which battery it's talking about

The same small light reports two different batteries, and mixing them up is the usual reason a case seems not to charge. Apple's rule: with the AirPods in the case and the lid open, the light shows the charge of the AirPods. With the AirPods out, it shows the charge of the case (Apple: Charge your AirPods).

Green means fully charged. Amber means less than one full charge remains. So to check that the case itself took a charge, lift the earbuds out and look; to check the earbuds, drop them in and leave the lid up.

Where to look depends on the case. The light is on the front of the case on AirPods 3, AirPods 4 and all AirPods Pro, and on the Wireless Charging Case for the first two generations. On the Lightning Charging Case for AirPods 1 and 2 it's inside the case, so you have to open the lid to see it.

On AirPods 4, AirPods Pro 2 and AirPods Pro 3 with current firmware, the amber light does a little more: it pulses when the AirPods or the case are under 95%, and flashes when the AirPods are under 95% and the case is under 25%. We keep the complete list of signals, including flashing white, in our guide to AirPods case light colors.

On a cable and on a wireless charger: step by step

The steps differ slightly because a wireless charger adds one thing that can go wrong, which is position.

  • Cable: plug the Lightning or USB-C cable into the case and the other end into a USB charger or port. Watch the light on connection, then open the lid to check it again whenever you like.
  • Wireless: set the case on a Qi-certified mat or MagSafe charger with the status light facing up and the lid closed. The light should show the charge level for 8 seconds.
  • AirPods 4 with Active Noise Cancellation: center the case flat on the charger, which is the placement Apple specifies for this case.
  • No light on the mat: lift the case and set it down again in a slightly different spot.
  • Any time later: tap the case while it sits on the charger. Amber means still charging, green means full.
  • Listen for the charging sound if your case plays one. Apple says it sounds when the case begins to charge.

Confirming it on an iPhone, iPad or Mac

The screen gives you a number instead of a color. On an iPhone or iPad, open the case lid with the AirPods inside and hold it near the device, go to Settings, tap Bluetooth, then tap the Info button next to your AirPods. Check it, wait ten minutes, check again: a number that went up is the proof.

On a Mac, open the lid and hold the AirPods close to the computer, open Control Center, click Sound and choose your AirPods from the list. Apple's user guide also points to the Bluetooth status menu in the menu bar, which shows the battery percentage of your AirPods; if that icon isn't there, you add it in System Settings under Menu Bar.

If you'd like the phone to tell you without being asked, AirPods Pro 2, AirPods Pro 3 and AirPods 4 with Active Noise Cancellation support Charging Notifications: a reminder when the battery is low and a notice when charging is complete. Turn it on in Settings by tapping your AirPods' name, then Battery. Apple lists iOS or iPadOS 26 or later and current AirPods firmware as requirements. Reading the levels themselves, including the case's, is covered in how to check AirPods battery.

The charging sound has a switch too. On the models whose case plays sounds, go to Settings, tap your AirPods' name and turn Enable Charging Case Sounds on or off; if you don't see it, tap Audio and Routing first (Apple: Change settings for AirPods or AirPods Pro). If your case used to make that sound and stopped, check that switch before you blame the charger.

With an Android phone, the case light is your main tool

Apple supports AirPods on non-Apple devices as a Bluetooth headset: you can listen and talk, and Siri is off the table. Its guide for those devices says nothing about showing battery level, so there's no Apple-documented way to read the charge on Android (Apple: Pair AirPods with a non-Apple device).

Android has its own battery widget. Google's Pixel help says it's available on Android 12 and later and works with devices that report battery info using Bluetooth or Google Fast Pair: touch and hold an empty space on a Home screen, tap Widgets, then Battery (Google: Check battery level on your Pixel phone). Whether your AirPods appear there, and whether the case does, isn't something Apple or Google promises, so treat a missing reading as normal.

That leaves the light, which works the same with any phone or with none. Lid open with the AirPods in for the earbuds, AirPods out for the case, amber for less than one full charge and green for full. More on what carries over is in do AirPods work with Android.

Signs it isn't charging, and what to do first

Three things point to a real problem: no light at all when you connect power, a battery number on the phone that doesn't move, or AirPods that are still empty after a night in the case. Apple asks you to give the case at least 15 minutes on a cable before drawing conclusions, and on a wireless charger to reposition it and then fall back to a cable if nothing happens.

A number that climbs but takes its time is a different issue, usually the power source, heat or a charging limit, and we cover it in why AirPods charge slowly. No charge at all goes to AirPods case not charging, which follows Apple's checklist in order.

If you keep the case in a cover, make sure you can still see the front of it when you check. Our printed AirPods cases are polycarbonate hard shells; if you charge wirelessly and the light doesn't come on with the cover fitted, take the cover off and try again before you suspect the charger.

AirPods Max have no charging case and their own status light on the headphones. Press the listening mode button: on the first model connected to power, green means 95% or more and amber means less.

Frequently asked questions

Does the orange light stay on when AirPods are charging?

No. The amber light shows for several seconds when charging starts, 8 seconds on a wireless charger according to Apple, then turns off while the case keeps charging. Tap the case on the charger or open the lid to see it again.

Are AirPods supposed to light up when charging?

The case lights up briefly when you connect power, and again when you open the lid or tap it on a wireless charger. Apple's guides describe a status light on the case only, not on the earbuds.

How do I know if my AirPods case is charging without the AirPods in it?

With the AirPods out, the status light reports the case. Amber when you connect power means it's charging and has less than one full charge; green means the case is full.

How do I know when my AirPods are fully charged?

Open the lid with the AirPods inside: a green light means they're full. On an iPhone you can also check the percentage under Settings, Bluetooth, Info, or turn on Charging Notifications on the models that support it.

Why does my AirPods case light turn off on the charger?

It's designed to. Apple says the light turns on for several seconds, then turns off while the case continues to charge.

Find the cover made for your AirPods

Shop the story

Keep reading